So I took the leap and bought a decent mig welder and have been practicing on thicker bits of steel.
What can I use to practice that will be Closest to the panel work on our vans? And where could I get it from? Heard washing machine panels etc but not very often people get rid of them!
Cheers
Best place to find welding practice pieces
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 228
- Joined: 05 Apr 2021, 20:48
- 80-90 Mem No: 17419
- Location: Newcastle upon tyne
Best place to find welding practice pieces
1987 1.6td hightop
-
- Registered user
- Posts: 203
- Joined: 06 Sep 2020, 06:40
- 80-90 Mem No: 0
Re: Best place to find welding practice pieces
My local auto factor sell 0.9mm panels for repairs. Nice clean metal and not expensive.
1982 Holdsworth poptop. 2L CU Aircooled.
1982 Danbury tintop Caravelle. 2L CU Aircooled.
1982 Danbury tintop Caravelle. 2L CU Aircooled.
Re: Best place to find welding practice pieces
Try your local scrap yard.
Went to one near me, told them about practicing welding.
They were happy to let me take away a damaged car bonnet for free
Went to one near me, told them about practicing welding.
They were happy to let me take away a damaged car bonnet for free
Prepare for the worst but hope for the best
1984 1.9 DG WBX Autohomes hightop
1984 1.9 DG WBX Autohomes hightop
-
- Registered user
- Posts: 606
- Joined: 21 Feb 2010, 20:50
- 80-90 Mem No: 17450
- Location: Derbyshire
Re: Best place to find welding practice pieces
See if you have a steel fabrication place anywhere near, they will have a scrap bin full of stuff that they might let you have a rummage round in if you ask nicely. They'll have stuff of various thicknesses, so you can get used to welding thicker stuff which is more forgiving and will allow you to get a feel for what effect the welder settings have without immediately just blowing holes in the panel. Once you have do a real nice job on bits of 4mm plate, work your way down to body panel thickness stuff.
Old car panels are OK but you have to clean all the paint off which is messy, but they are good practice.
I learned to weld using the window holes we cut out of t4s and t5s when I used to work converting vans.
Old car panels are OK but you have to clean all the paint off which is messy, but they are good practice.
I learned to weld using the window holes we cut out of t4s and t5s when I used to work converting vans.
-
- Registered user
- Posts: 228
- Joined: 05 Apr 2021, 20:48
- 80-90 Mem No: 17419
- Location: Newcastle upon tyne
Re: Best place to find welding practice pieces
Thanks everyone. I have been practicing on 4mm plate and I havnt half distorted it but that has been laying long lines which is completely different to body work. Be a while before I venture into chopping bits out the van!
Will have a Google for local fabrication places/scrap yrads for scrap but all I've come up with so far is ebay which says it be mixed with galvanised and I know that's not fun to weld.
Will have a Google for local fabrication places/scrap yrads for scrap but all I've come up with so far is ebay which says it be mixed with galvanised and I know that's not fun to weld.
1987 1.6td hightop
-
- Registered user
- Posts: 1824
- Joined: 10 May 2013, 11:59
- 80-90 Mem No: 13706
- Location: Central Scotland
Re: Best place to find welding practice pieces
If you’re going to be doing body work, you’ll be mostly using 1.6mm (for durability and ease of welding) or 1.2 (to match what you’re welding to and to make fabrication easier) so just buy some off eBay and cut bits off for practice, you’ll easily use the rest.
Admire your process, I just wellied in with shyte welding, and am only now taking the time to perfect the settings on my machine. I found the wire speed control is exponential! Even though it has a linear pot, so it now has a much bigger knob.
Anyone want to see a photo of my big shiny knob?
Admire your process, I just wellied in with shyte welding, and am only now taking the time to perfect the settings on my machine. I found the wire speed control is exponential! Even though it has a linear pot, so it now has a much bigger knob.
Anyone want to see a photo of my big shiny knob?
Have you ever seen an unhappy fool?
88 Transporter with hitop camper conversion, 1.6td.
88 Transporter with hitop camper conversion, 1.6td.
-
- Registered user
- Posts: 1824
- Joined: 10 May 2013, 11:59
- 80-90 Mem No: 13706
- Location: Central Scotland
Re: Best place to find welding practice pieces
Meccano. I’ve since added a scale to the white painted bit.
Have you ever seen an unhappy fool?
88 Transporter with hitop camper conversion, 1.6td.
88 Transporter with hitop camper conversion, 1.6td.