is there a 1 way valve where the filler hose enters the tank?
reason i'm asking is that i want to remove the lpg system from our audi 80 and the gas tank is 3/4 full. in order to remove the filler fitment from the car i need to remove the high pressure fill hose from the back of it but i'm unsure wether this will drain the tank hence my question. i know theres an electronic valve on the outlet but is there owt on the inlet please?
cheers
rozzo
1 way valve?
Moderators: User administrators, Moderators
1 way valve?
LT owner and positively rattling around with the new found space
member 3339
member 3339
- toomanytoys
- Trader
- Posts: 2850
- Joined: 11 Oct 2005, 18:37
- 80-90 Mem No: 41
- Location: Boston area, South Lincolnshire
Re: 1 way valve?
the fittings on the tank. there should be a non return at the tank as well as the filler point on the bodywork.. ![OK! :ok](./images/smilies/ok.gif)
![OK! :ok](./images/smilies/ok.gif)
- The_blue
- Registered user
- Posts: 310
- Joined: 22 Feb 2007, 16:01
- 80-90 Mem No: 3484
- Location: Mansfield ish.
Re: 1 way valve?
I've seen tanks on ebay with the advert stating it's 1/2 full so must be a valve on top.
Joined club Talbot!
Re: 1 way valve?
cheers fellas ![OK! :ok](./images/smilies/ok.gif)
![OK! :ok](./images/smilies/ok.gif)
LT owner and positively rattling around with the new found space
member 3339
member 3339
Re: 1 way valve?
I've just removed the whole lpg system from my van and all the tanks are individual sealed units. The only gas loss was a very small amount that was inside pipework.
Donald
Donald