Hi, I am looking to change the cam belt on my 1.6D CS T25.
I have just watched a Utube vid which says I need a locking tool for the crank, a locating pin thingi for the injector pump and a locking device for the cam.
I should think I could use a file or something for the slot on the cam but not sure of the crank and pump tools.
Do I need a special kit or can I get away with using some other method?
There is a new belt and tensioner on eBay for a reasonable £45 but no complete kit.
Advice appreciated before I buy the belt only to find out i have got to buy the tools which perhaps come with a belt.
I cant find a complete kit online.
Thanks.
CS 1.6D cam belt change tools?
Moderators: User administrators, Moderators
-
- Trader
- Posts: 2612
- Joined: 27 May 2009, 18:56
- 80-90 Mem No: 16628
- Location: hayling island
Re: CS 1.6D cam belt change tools?
Drill bit for the pump
Flat plate , spanner file etc for the cam
There’s a pointer on the crank , no
Tool
Flat plate , spanner file etc for the cam
There’s a pointer on the crank , no
Tool
Re: CS 1.6D cam belt change tools?
OK thanks I will get the cam belt on eBay.
Very useful forum, I only come here when I want something
Thank you.
Very useful forum, I only come here when I want something
Thank you.
-
- Trader
- Posts: 3045
- Joined: 08 Oct 2005, 19:36
- 80-90 Mem No: 1
- Location: Huddersfield, WeYo.
- Contact:
Re: CS 1.6D cam belt change tools?
All you need to swap a belt
https://brickwerks.co.uk/product/tool-v ... cking-set/
But, good practice to check the pump timing too, then you need to spend more money.
https://brickwerks.co.uk/product/tool-b ... iming-kit/
https://brickwerks.co.uk/product/tool-v ... cking-set/
But, good practice to check the pump timing too, then you need to spend more money.
https://brickwerks.co.uk/product/tool-b ... iming-kit/