A 'whats this' question - loose wire in engine bay
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 238
- Joined: 19 Apr 2015, 17:48
- 80-90 Mem No: 14427
- Location: Near Bishops Stortford
A 'whats this' question - loose wire in engine bay
I've got this hanging down and the wire is just loose in there, its not soldered, crimped or anything - just dangling... Any ideas?
1990 Atlantic Westy Pop-Top... 1.9TD
- Aidan
- Trader
- Posts: 6580
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: A 'whats this' question - loose wire in engine bay
what colour is the wire and does it come out of the black wrapped loom or is it separate ?
-
- Registered user
- Posts: 238
- Joined: 19 Apr 2015, 17:48
- 80-90 Mem No: 14427
- Location: Near Bishops Stortford
Re: A 'whats this' question - loose wire in engine bay
Yes it comes out the loom
there's 2 pictures there - one showing inline the other is a link.
It’s green and white striped under the muck.
1 side of it freely moves out.
there's 2 pictures there - one showing inline the other is a link.
It’s green and white striped under the muck.
1 side of it freely moves out.
Last edited by Middle29 on 11 Jul 2018, 14:25, edited 1 time in total.
1990 Atlantic Westy Pop-Top... 1.9TD
-
- Registered user
- Posts: 998
- Joined: 24 Jul 2012, 20:40
- 80-90 Mem No: 14436
- Location: West Sussex
Re: A 'whats this' question - loose wire in engine bay
What year?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- Registered user
- Posts: 998
- Joined: 24 Jul 2012, 20:40
- 80-90 Mem No: 14436
- Location: West Sussex
Re: A 'whats this' question - loose wire in engine bay
Another way of looking at it - what doesn’t work.
How long does the light take to go off for glow plugs
Does temperature sender work
Does it run at all
There’s only 6 wires I think
Sent from my iPhone using Tapatalk
How long does the light take to go off for glow plugs
Does temperature sender work
Does it run at all
There’s only 6 wires I think
Sent from my iPhone using Tapatalk
-
- Registered user
- Posts: 238
- Joined: 19 Apr 2015, 17:48
- 80-90 Mem No: 14427
- Location: Near Bishops Stortford
Re: A 'whats this' question - loose wire in engine bay
It’s a 1990 but with Aaz engine. Everything works as far as I’m aware, but now you’ve mentioned those items, glow plug light doesn’t go off! I normally count about 7 seconds and I’m not sure about temp.
Is the white plug part just a connection that shields it from the crud or is there something in that?. Excuse my ignorance.
Is the white plug part just a connection that shields it from the crud or is there something in that?. Excuse my ignorance.
1990 Atlantic Westy Pop-Top... 1.9TD
- Aidan
- Trader
- Posts: 6580
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: A 'whats this' question - loose wire in engine bay
looking at the picture is it the wires with the two yellow plugs joined together that you are worried about or is there another wire behind to the left that has no terminal on it ?
-
- Registered user
- Posts: 238
- Joined: 19 Apr 2015, 17:48
- 80-90 Mem No: 14427
- Location: Near Bishops Stortford
Re: A 'whats this' question - loose wire in engine bay
Yes the one with the yellow plugs. 1 side is just placed in there, not fixed.
1990 Atlantic Westy Pop-Top... 1.9TD
-
- Registered user
- Posts: 998
- Joined: 24 Jul 2012, 20:40
- 80-90 Mem No: 14436
- Location: West Sussex
Re: A 'whats this' question - loose wire in engine bay
Glow plug temperature sender then.
Are you saying it’s just loose in the connector? If so just crimp another one?
Sent from my iPhone using Tapatalk
Are you saying it’s just loose in the connector? If so just crimp another one?
Sent from my iPhone using Tapatalk
-
- Registered user
- Posts: 238
- Joined: 19 Apr 2015, 17:48
- 80-90 Mem No: 14427
- Location: Near Bishops Stortford
Re: A 'whats this' question - loose wire in engine bay
Yes I suppose thats what I'll do - I wanted to know what it was before I reconnected it. Always slightly worried it's disconnected for a reason that I am not aware off - thanks.
1990 Atlantic Westy Pop-Top... 1.9TD
-
- Registered user
- Posts: 998
- Joined: 24 Jul 2012, 20:40
- 80-90 Mem No: 14436
- Location: West Sussex
Re: A 'whats this' question - loose wire in engine bay
My 1y conversion needs a resistor in line to have enough glow time. Possibly it’s the same on the aaz. Likely won’t find out this time of year, might struggle to start later in the year. Google for aaz conversion instructions?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- Registered user
- Posts: 998
- Joined: 24 Jul 2012, 20:40
- 80-90 Mem No: 14436
- Location: West Sussex
Re: A 'whats this' question - loose wire in engine bay
http://www.4crawler.com/Diesel/CheapTri ... lugs.shtml" onclick="window.open(this.href);return false;
This should probably go in the wiki - some very useful diagnosis tips.
Sent from my iPhone using Tapatalk
This should probably go in the wiki - some very useful diagnosis tips.
Sent from my iPhone using Tapatalk
-
- Registered user
- Posts: 238
- Joined: 19 Apr 2015, 17:48
- 80-90 Mem No: 14427
- Location: Near Bishops Stortford
Re: A 'whats this' question - loose wire in engine bay
Thanks for this, to be honest it starts great touch wood - (after changing fuel lines).
But i just count 7 or 8 seconds. Temp sender makes perfect sense so far..
But i just count 7 or 8 seconds. Temp sender makes perfect sense so far..
1990 Atlantic Westy Pop-Top... 1.9TD