I have one on my tiger. I'm a big fan. Yes it does take a bit of messing around to get it adjusted properly so that you don't get oil everywhere. The guys in Milngavie are oder helpful if you have any problems. I have the e-system. Expensive but worth every penny IMO
Sent from my iPhone using Tapatalk
non VW, Scottoiler fitting
Moderators: User administrators, Moderators
- Ian and Lins
- Registered user
- Posts: 1906
- Joined: 27 Apr 2007, 13:18
- 80-90 Mem No: 3532
- Location: Rushden, Northants (God's waiting room)
- Contact:
Re: non VW, Scottoiler fitting
Oldiebut goodie wrote:A correct split link is made of the same materials as a standard link - there appears to be a lot of misinformation concerning them over the web, the majority of it coming from the US. Also the use of hot grease for lubrication is detailed in Renolds literature! I would rather have grease inside a bearing (the roller) than oil on the periphery being flung off in a total loss system. If the chain is running in an oil bath like a primary chain it makes sense to use oil, not on an open secondary though.
Of course this is only relevant to the older types of chain not the modern O/X/whatever ring ones ( what is the lubricant in an O ring chain?.....grease! )
Split links are known to be used on dragsters so the bhp argument fails right there.
What you say makes good engineering sense (that means, "your right") and I didn't know they were used in high output engines. To tell the truth I've never had a chain break or a split link fail and I think this is because I try and keep up on maintenance.
Are we going on anything else?
1985 Petrol 1.9 A/S Hightop
1985 Petrol 1.9 A/S Hightop
-
- Registered user
- Posts: 546
- Joined: 11 Aug 2014, 21:18
- 80-90 Mem No: 14256
- Location: halifax
Re: non VW, Scottoiler fitting
What cc is your bike though.?
1989 Autosleeper Trooper 1.9 petol
BMW R1200 GSA (proper motorbike)
BMW R1200 GSA (proper motorbike)
- Ian and Lins
- Registered user
- Posts: 1906
- Joined: 27 Apr 2007, 13:18
- 80-90 Mem No: 3532
- Location: Rushden, Northants (God's waiting room)
- Contact:
Re: non VW, Scottoiler fitting
lodgey62 wrote:What cc is your bike though.?
1000cc V twin; about 140 BHP and nearly 70 f/lb of torque. Riveted link. Had lots of bikes up to 850 cc and about 50-60 bhp and used split link.
On the oiling question, our local Aldi is floging off bottles of Muc-Off chain oils about £2 a bottle. Aimed at push bikes but working fine on my 'Winter'' bike.
Are we going on anything else?
1985 Petrol 1.9 A/S Hightop
1985 Petrol 1.9 A/S Hightop