without the circlips in 0.1mm increments and some skill it's pretty difficult to properly set up new trunions yourself, with the supplied circlips you'll either be lucky or not, they are an agricultural product different spec to the original
relationship to gearboxes is irrelevant either the prop is balanced or it isn't
I gave up doing myself give them to the pros ie GKN or similar
Is it a bird - no its a bloody squeek ??
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 124
- Joined: 18 Jan 2009, 00:38
- 80-90 Mem No: 11553
- Location: Deepest Essex
Re: Is it a bird - no its a bloody squeek ??
Thanks Aidan.
Just noticed the following on Simon page for the UJ's
'Please note this UJ comes with clips and a grease nipple, you need to remove the old grease nipple blanking plug from your old UJ and fit it to the new one"
This page seems to suggest I should have replaced the rubber coupling at the same time.
http://www.syncro.org/DriveShaft.htm#1
By the time I get it balanced I will have been better off getting a recon prop.
The Christmas Turkey is getting smaller all the time !!!
Just noticed the following on Simon page for the UJ's
'Please note this UJ comes with clips and a grease nipple, you need to remove the old grease nipple blanking plug from your old UJ and fit it to the new one"
This page seems to suggest I should have replaced the rubber coupling at the same time.
http://www.syncro.org/DriveShaft.htm#1
By the time I get it balanced I will have been better off getting a recon prop.
The Christmas Turkey is getting smaller all the time !!!
RHD Holdsworth Syncro
-
- Registered user
- Posts: 124
- Joined: 18 Jan 2009, 00:38
- 80-90 Mem No: 11553
- Location: Deepest Essex
Re: Is it a bird - no its a bloody squeek ??
Aidan wrote:without the circlips in 0.1mm increments and some skill it's pretty difficult to properly set up new trunions yourself, with the supplied circlips you'll either be lucky or not, they are an agricultural product different spec to the original
I gave up doing myself give them to the pros ie GKN or similar
Thanks Aidan, what do GKN charge to center the prop? A local propshaft balancing shop said they couldn't do it.
I think its really odd that my previously balanced prop is now not centred or balanced. BW's description of the GKN UJ's I have fitted is OEM (ie not agricultural) so would have thought standard circlips should be fine. Surely OEM UJ's are a precision fit. The mechanic at my local garage is not a bodger but a good mechanic. He was really puzzled by it.
RHD Holdsworth Syncro
- Aidan
- Trader
- Posts: 6580
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: Is it a bird - no its a bloody squeek ??
last time I took 2 in was £160 the pair inc the vat, 24 hour turnaround
GKN at Leek
GKN at Leek
-
- Registered user
- Posts: 124
- Joined: 18 Jan 2009, 00:38
- 80-90 Mem No: 11553
- Location: Deepest Essex
Re: Is it a bird - no its a bloody squeek ??
Aidan wrote:last time I took 2 in was £160 the pair inc the vat, 24 hour turnaround
GKN at Leek
Cheers Aidan. I take it that includes fitting new UJ's and centering and balancing.
Measured my old circlips and they are all the same.
RHD Holdsworth Syncro
-
- Registered user
- Posts: 798
- Joined: 15 Oct 2006, 11:19
- 80-90 Mem No: 5533
- Location: rambler de oria, near albox,almeria,spain
Re: Is it a bird - no its a bloody squeek ??
Do you know if the yoke was taken off the rubber donut?cause it could have been assembled 90deg out...
I've heard that this can cause prop vibes!!!
I've heard that this can cause prop vibes!!!
I dont think, so I'm not[do I exist?]
1992 1600td [ jx ] syncro panel van[leisuredrive camper ]
1992 1600td [ jx ] syncro panel van[leisuredrive camper ]
-
- Registered user
- Posts: 124
- Joined: 18 Jan 2009, 00:38
- 80-90 Mem No: 11553
- Location: Deepest Essex
Re: Is it a bird - no its a bloody squeek ??
Thanks Dave, no I believe the rubber was not removed.dave friday wrote:Do you know if the yoke was taken off the rubber donut?cause it could have been assembled 90deg out...
I've heard that this can cause prop vibes!!!
RHD Holdsworth Syncro