Rounded and seized wheel nut options.
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 6
- Joined: 12 Jan 2010, 21:34
Rounded and seized wheel nut options.
Nightmare.
I took my van to get some new tires and the tire fitting place couldn't get one of the nuts off. They rounded the nut a little bit and then I tried and rounded it a little bit more. I'm still getting some grip on it, but what are my options???
I took my van to get some new tires and the tire fitting place couldn't get one of the nuts off. They rounded the nut a little bit and then I tried and rounded it a little bit more. I'm still getting some grip on it, but what are my options???
Re: Rounded and seized wheel nut options.
If all else fails.I would bang a size smaller socket onto it.
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
"The difference between genius and stupidity is that genius has its limits"
- CycloneMike
- Registered user
- Posts: 439
- Joined: 04 Aug 2007, 09:27
- 80-90 Mem No: 3787
- Location: North
Re: Rounded and seized wheel nut options.
You took your van to a "professional" tyre fitter and they couldn't remove the nuts?
Instead of informing you they continued to try until they rounded them, then they handed it back to you......
Personally, I would go back and ask them how they intend to sort it out.
Instead of informing you they continued to try until they rounded them, then they handed it back to you......
Personally, I would go back and ask them how they intend to sort it out.
NO PIES CAKES OR BEER LEFT IN THIS VAN OVERNIGHT.
Member Number 3787
Member Number 3787
-
- Registered user
- Posts: 6
- Joined: 12 Jan 2010, 21:34
Re: Rounded and seized wheel nut options.
Agreed. "Professional" tire fitters these days amount to spotty 16 year olds with blow torches.
I wasn't about to leave my pride and joy with them until I'd sought further advice!
I'm don't what to think what methods they'd try if I left it in their hands....
I wasn't about to leave my pride and joy with them until I'd sought further advice!
I'm don't what to think what methods they'd try if I left it in their hands....
-
- Registered user
- Posts: 1339
- Joined: 20 Jul 2010, 20:54
- 80-90 Mem No: 8552
- Location: Cheddleton, Staffordshire
Re: Rounded and seized wheel nut options.
http://www.amazon.co.uk/IRWIN-Piece-Exp ... _sim_diy_1
1990 1.9dg tintop....back in the fold.....
- kevtherev
- Registered user
- Posts: 18830
- Joined: 23 Oct 2005, 20:13
- 80-90 Mem No: 2264
- Location: Country estate Wolverhampton Actually
Re: Rounded and seized wheel nut options.
jackytwoshoes wrote:Agreed. "Professional" tire fitters these days amount to spotty 16 year olds with blow torches.
I wasn't about to leave my pride and joy with them until I'd sought further advice!
I'm don't what to think what methods they'd try if I left it in their hands....
Good on you for asking a 2nd opinion
AGG 2.0L 8V. (Golf GTi MkIII)
Re: Rounded and seized wheel nut options.
+1 on the Irwins - have known those to get folks out of many a scrape.
Good luck
Stu
Good luck
Stu
ex-1985 Type 2 T3 Transporter - 1.9 DG - The Van's Blog
-
- Registered user
- Posts: 28
- Joined: 09 Sep 2010, 21:53
- 80-90 Mem No: 0
- Location: Fareham, Hampshire
Re: Rounded and seized wheel nut options.
Interestly, or not, I had two new back tyres fitted today. I asked the fitter to try and ease off the bolts to the front o/s wheel as I just could not shift them with my brace. He offered up the air gun, but it just whirred away not making an impression. All the other wheel nuts/bolts freed up with little effort. The guy tried using a socket and extension bar, but it started to bend so he was relunctant to continue. He reckoned the previous fitter had over tightened them well beyond the recommended torque setting. Unsure what to do now other than maybe call out the AA and see if they have any road-side solutions for this. Any one had seized front bolts before? And if so how did you overcome it?
Merry christmas by the way
Merry christmas by the way
- kevtherev
- Registered user
- Posts: 18830
- Joined: 23 Oct 2005, 20:13
- 80-90 Mem No: 2264
- Location: Country estate Wolverhampton Actually
Re: Rounded and seized wheel nut options.
I had this with a busted key socket for a locking nut.
I took it to a garage after various attempts.
he got a breaker bar and some sort of universal socket that tightened on what ever was there.
The nut came away eventually, I asked what would have happened if this tool didn't do the job.
there was a nut splitter, but that would not have worked as the nut was in a recess on the alloy.
finally it would have been the torch and try red hot removal.
or burn it off with the oxy cutter,
new stud would have been needed after that... and some refurb to the wheels.
I took it to a garage after various attempts.
he got a breaker bar and some sort of universal socket that tightened on what ever was there.
The nut came away eventually, I asked what would have happened if this tool didn't do the job.
there was a nut splitter, but that would not have worked as the nut was in a recess on the alloy.
finally it would have been the torch and try red hot removal.
or burn it off with the oxy cutter,
new stud would have been needed after that... and some refurb to the wheels.
AGG 2.0L 8V. (Golf GTi MkIII)
-
- Registered user
- Posts: 497
- Joined: 19 Apr 2008, 13:18
- 80-90 Mem No: 5649
- Location: Writtle Essex
Re: Rounded and seized wheel nut options.
These Irwin bolt removers are great one of the best tool accessories I have I used once for a rounded bolt, once on a phillips screw with a knackered head was surprised it worked on this but it did and a couple of days ago i put new resistors in the heater blower unit , was the top tool to remove those damn shear bolts on the column
1988 Autohomes Komet 1.9DG
DIKXEY
DIKXEY
- BOXY
- Registered user
- Posts: 1101
- Joined: 21 Feb 2009, 15:37
- 80-90 Mem No: 8826
- Location: Sunny SouthWest
Re: Rounded and seized wheel nut options.
The first (and last) time I got a flat I couldn't get the wheel off. The AA duly turned up and after a good soaking in Plus-Gas even the "shift anything breaker" didn't work. After accepting if anything broke it would be on my head we put his tow-bar over the breaker giving it a 5-6ft extension and leaned on it. Luckily the nut gave up its grip before the stud sheared. Next time the tyres are due a change I think I'll start spraying Plus-Gas a week before.
2ltr Aircooled CU with twin Solex's & originally a 009 dizzie, but now back to standard.
-
- Registered user
- Posts: 28
- Joined: 09 Sep 2010, 21:53
- 80-90 Mem No: 0
- Location: Fareham, Hampshire
Re: Rounded and seized wheel nut options.
I once sheared a wheel stud on an old mini I had and it was easy to replace. Not so sure removing a sheared bolt from a hub is so easy if that should happen. Have soaked the area in WD40 in a vain attempt to promote some movement, but I suspect a long bar as your AA saviour used might be the plan. Have heard that a sharp tap using a lump hammer on the head of the bolt sometimes cracks the thread enough to get some movement.
- kevtherev
- Registered user
- Posts: 18830
- Joined: 23 Oct 2005, 20:13
- 80-90 Mem No: 2264
- Location: Country estate Wolverhampton Actually
Re: Rounded and seized wheel nut options.
are we talking........ front or back?
as it's a press in stud on the rear and screw in fronts
as it's a press in stud on the rear and screw in fronts
AGG 2.0L 8V. (Golf GTi MkIII)
-
- Registered user
- Posts: 28
- Joined: 09 Sep 2010, 21:53
- 80-90 Mem No: 0
- Location: Fareham, Hampshire
Re: Rounded and seized wheel nut options.
Definitely the front, all 5 bolts are as tight as you like.
Re: Rounded and seized wheel nut options.
Halfrauds locking wheel nut remover?
Socket with a reverse thread cut into it so as you undo the bolt the thread bites into it more.
about a tenner IIRC.
Socket with a reverse thread cut into it so as you undo the bolt the thread bites into it more.
about a tenner IIRC.