owdi ( Audi) A6 alloys 15in do they fit or can make them fit ? somone on Fleabay is
selling some and says they may fit !
Another wheel question!
Moderators: User administrators, Moderators
- kevtherev
- Registered user
- Posts: 18830
- Joined: 23 Oct 2005, 20:13
- 80-90 Mem No: 2264
- Location: Country estate Wolverhampton Actually
[from simon at brickwerks]Audi 100/200 Ronals, these are one of the most popular choices for T3's, probably something to do with keeping within the VW family, offset is a little small and the wheel tend to rub on the suspension or the brake caliper, this is easily remedied by the fitting of 5 mm shims that are available from most good accessory shops, the centre of the wheel needs machining to 66 mm and longer bolts!!
Audi A4, A6, A8, V8, S2, S4, S6 and new Passat have the required PCD and the centre bore seems to be quite big too although I suspect that machining will have to be carried out to allow the hub nut and bearing cap to be able to peek through the centre hole.ET35-45, centre bore 57mm
AGG 2.0L 8V. (Golf GTi MkIII)