Another silly question no doubt, but here goes
Right, the pipe work on this was reet brittle and snapped
I presume that this is the servo hose(?)
The hose seems to be heat crimped or something ::shrug:: onto the non return valve.... assuming the valve is fine am I alright to use a bit of fuel hose of the appropriate girth and jubilee clips to attached the valve back up to the carb balancing pipe? (thats the bit where it snapped)..... or is that foolish? i.e Rather than sourcing the hard plastic tubing, and getting it sealed onto the valve unit.
Thanks in advance (again)
Billy
servo hose? Sorted thanks!
Moderators: User administrators, Moderators
- very_bland
- Registered user
- Posts: 253
- Joined: 11 Oct 2009, 01:19
- 80-90 Mem No: 7610
- Location: Stourbridge
servo hose? Sorted thanks!
Last edited by very_bland on 16 Feb 2011, 18:02, edited 1 time in total.
Re: servo hose?
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
"The difference between genius and stupidity is that genius has its limits"
- very_bland
- Registered user
- Posts: 253
- Joined: 11 Oct 2009, 01:19
- 80-90 Mem No: 7610
- Location: Stourbridge
Re: servo hose?
Cheers Rob, I assume that it doesn't really matter that its for a 1.9WBX
I should have put that it is for a 2l AC in the first post, apologies for that!
Billy
I should have put that it is for a 2l AC in the first post, apologies for that!
Billy
Re: servo hose?
No mate.It matters not
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
"The difference between genius and stupidity is that genius has its limits"
- very_bland
- Registered user
- Posts: 253
- Joined: 11 Oct 2009, 01:19
- 80-90 Mem No: 7610
- Location: Stourbridge