1.9 dg water pump noise

[Stesaw]

i carry a new one on board, on the basis of if i have it i shouldnt need it

Yeah sods law would quickly come into effect if you didn't have it.

[Sir Brixalot]

Ordered mine yesterday and received it before midday today

Had it fitted and it still squeaks. The pump is new, the belt is new so must be the pulley is too smooth. Oh well there was a couple off mm wobble in the pump so probably would have needed changing in the near future

[Swebby]

Squeaks on start up or all the time? Mine squeals for about 2 seconds on a cold start but not at any time else. So reckon it is belt rather than pump.


Sent from my BBB100-2 using Tapatalk

[Sir Brixalot]

Start up mainly. Pullies aren't much so I'll do them anyway when BW have them in stock again

[Mocki]

Check alternator bearings

[Sir Brixalot]

Shouldn't be, had it rebuilt last year but I'll check

[sarahandthebear]

Ok water pump has arrived and I have a few more questions before I start. I was thinking instead of draining the whole system can I just take off the water pump and catch the coolant in a bucket? I then finish installing the new pump and bleed the system as it states on the wiki. Or do I have to drain all of the coolant first. One more question and that is with the seel and parts that come with the water pump do I have to apply any sort of oil or lubrication to help them stick or is it simply placing them in the relevant spots and fitting. Thanks guys

[jrt]

It depends on how old your coolant is really. When i did mine i just undid the hoses to the pump/thermostat and collected any coolant in a bucket. I then tied up the pipes to stop anymore draining out. When re assembling i used a smear of instant gasket on the necessary parts.
David.