Hi all can someone with power steering take a couple of pictures of tank bracket.. of where it goes and how it fits please where,what does it bolt on to other bracket or fittings??? Thanks
Simon
No photos anyone?? Just need to see how it fits
Power steering tank
Moderators: User administrators, Moderators
- dumbo
- Registered user
- Posts: 477
- Joined: 24 Jan 2012, 20:21
- 80-90 Mem No: 10625
- Location: burwell cambridgeshire
Power steering tank
1986 DG WBX AUTOHOMES kamper
Re: Power steering tank
Hi Simon,
Will photo tomorrow and send to you. Subject to suitable weather. Prefer to email or Whatsapp if possible.
Tazstu@btinternet.com 07961 423324.
Regards
Stuart
Will photo tomorrow and send to you. Subject to suitable weather. Prefer to email or Whatsapp if possible.
Tazstu@btinternet.com 07961 423324.
Regards
Stuart
MaxStu
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
Re: Power steering tank
Very difficult to photo...from underneath
MaxStu
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
Re: Power steering tank
From side. The fluid container slots in place in metal bracket. I cannot see if bracket is bolt or screw mounted to rear panel
MaxStu
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
-
- Trader
- Posts: 16347
- Joined: 08 Jun 2009, 09:51
- 80-90 Mem No: 6908
- Location: Surrey Syncronaut #156
- Contact:
Re: Power steering tank
The reservoir retaining bracket is welded to the rear valence panel reinforcement.
One of the holes in the bracket is used for alignment (to a hole in the panel)
Some petrol vans use a single TD engine bar mounting plate (the D shaped one with three holes) as a platform for the bracket, some others don't. I got this info from a friend on the samba forum so it may be a US detail?
Sent from my S60 using Tapatalk
One of the holes in the bracket is used for alignment (to a hole in the panel)
Some petrol vans use a single TD engine bar mounting plate (the D shaped one with three holes) as a platform for the bracket, some others don't. I got this info from a friend on the samba forum so it may be a US detail?
Sent from my S60 using Tapatalk
- dumbo
- Registered user
- Posts: 477
- Joined: 24 Jan 2012, 20:21
- 80-90 Mem No: 10625
- Location: burwell cambridgeshire
Re: Power steering tank
yes thanks for all the replies n pictures not welding it i,ve sprayed it already so i made an bracket for the 2x holes to bolt on so another job done
1986 DG WBX AUTOHOMES kamper