i'm fed up with my dash tray
the cup holders, don't
you goround a corner and what ever is in there comes out, because they are too shallow
irecently replaced the guttering on the house, and found that the joints are the same internal diameter of the base of the cup holder
so i figure if i cut up a down pipe joint, i wrapped tape around a holesaw (i'm too cheap to buy one the right size)
with a tin sat in there
i'll glue it in with araldite, and then black silicon to seal around to be sure it won't come loose
dash tray mods
Moderators: User administrators, Moderators
- daschmoo
- Registered user
- Posts: 48
- Joined: 04 Dec 2007, 10:35
- 80-90 Mem No: 4507
- Location: Tamworth, Staffs
Re: dash tray mods
I agree about them being a tad shallow but glueing (sp?) in a lump of pipe isn't exactly pretty! What happens if you drop something small into the now really deep recepticle... gonna need tweezers or pliers to retrieve it! I just wedge (ha) a bit of rubber or sommat in to secure it if I'm gonna be rally cross driving...
Re: dash tray mods
i'm rough, design over function is not for me
if you saw my bus, my home, me, you'd see
if it works, i don't care what it looks like
the hole i cut in the ash tray space is for my ipod dock, i could have cut a pretty hole, that ain't me
maybe someone will see what i've done and design better from it, it's a win win
OH an i have really long fingers and can pick up a 1p coin from the bottom of it no problems
if you saw my bus, my home, me, you'd see
if it works, i don't care what it looks like
the hole i cut in the ash tray space is for my ipod dock, i could have cut a pretty hole, that ain't me
maybe someone will see what i've done and design better from it, it's a win win
OH an i have really long fingers and can pick up a 1p coin from the bottom of it no problems
Re: dash tray mods
My ugly, cracked dash untidy was the first thing to get ripped out and binned
-
- Registered user
- Posts: 5
- Joined: 25 Mar 2010, 20:38
- 80-90 Mem No: 0
- Location: Beckenham. Kent
Re: dash tray mods
cruz - im with you mate, mine was in the bin day one !
. . . we both know what memories can bring - they bring diamonds and rust . . .
Re: dash tray mods
Hi, kind of related,thought might be of interest - at the British VW show last Sat I picked up a centre console from a DAF truck. It has 2 cupholders and a lockable box behind. It fits in the walkthrough without fouling the handbrake, and is low enough to a:> climb over, and b:> allow my psngr side swivel to pass over the top - it even has steel screw bases to attach to the floor for security.
I'm pretty happy with it as an alternative to the not so nice dash tidies.
I'm pretty happy with it as an alternative to the not so nice dash tidies.
1989 Converted Panel Van Tin Top
- geordie skydiver
- Registered user
- Posts: 141
- Joined: 10 May 2006, 07:51
- 80-90 Mem No: 2988
- Location: Durham
- Contact:
Re: dash tray mods
Dumpy, can you post a picture or have you contact details for the guy who sold you it?
Or even the DAF part number?
Or even the DAF part number?