Next....slider middle runner
Posted: 19 Dec 2015, 21:20
Well did this recently
you get the tell tale rust streaks and you have a good idea what it is but you prefend its not bad and wipe it away eh
well we wiped it with a wire brush
we make and fit a lot of these and whilst they have featured in the odd resto i thought it might be worth a quick thread on it , also tv is carp at the moment
so best way to cure it follows..........................
......
and
..
we now end up with the following picks
......
.....
oh and for good measure these are the slider
....
....
part making
they sort of fit like this, as they get gassed in then happy to have an expansion gap to save distortion
I had the runner grit blasted and got a new cover channal , also mr bullet , note its spotted on
the panals a have made are 16g or 1.5mm or thereabouts
all new metal now
as is the slider
..
door back on , bit of gloss and new seal and were done , got some more picks, if i find them i add them
mm
you get the tell tale rust streaks and you have a good idea what it is but you prefend its not bad and wipe it away eh
well we wiped it with a wire brush
we make and fit a lot of these and whilst they have featured in the odd resto i thought it might be worth a quick thread on it , also tv is carp at the moment
so best way to cure it follows..........................
......
and
..
we now end up with the following picks
......
.....
oh and for good measure these are the slider
....
....
part making
they sort of fit like this, as they get gassed in then happy to have an expansion gap to save distortion
I had the runner grit blasted and got a new cover channal , also mr bullet , note its spotted on
the panals a have made are 16g or 1.5mm or thereabouts
all new metal now
as is the slider
..
door back on , bit of gloss and new seal and were done , got some more picks, if i find them i add them
mm