Rust treatment
Moderators: User administrators, Moderators
Rust treatment
I am going to rust treat the floor of my van. The whole of the floor and the upper section around the engine 'lid/hatch'. I will be wire brushing it all but want to treat it all for the bits that still have some surface rust. I could do with something that I could brush on. The smaller bottles of KURUST and LOCTITE RUST REMEDY would be so expensive. Anybody know of something which could do the job but not as expensive please? As many different opinions as can be would be most welcome. And I do know about Vactan. By the way: Stay safe everyone, a short few weeks in isolation is better than many years grieving.
Re: Rust treatment
Some good options here:
https://www.bilthamber.com/corrosion-pr ... reatments/" onclick="window.open(this.href);return false;
HYDRATE 80 to treat the rust and then ELECTROX as a primer.
https://www.bilthamber.com/corrosion-pr ... reatments/" onclick="window.open(this.href);return false;
HYDRATE 80 to treat the rust and then ELECTROX as a primer.
88 Autosleeper Trident 1.9
Hythe, Kent.
Hythe, Kent.
Re: Rust treatment
Yes I second Fugeh, I've had good results with Hydrate 80 and the price is OK.
Happy Easter!
Happy Easter!
1980 2l CU Aircooled; left-hand drive - now officially a historic vehicle!
- rollercoaster
- Registered user
- Posts: 897
- Joined: 10 Dec 2008, 20:30
- 80-90 Mem No: 6231
- Location: Carmarthenshire Ceridigion border
Re: Rust treatment
Yes be safe everyone,
a spend now will save a lot of grief later!
Ordered a Bilt Hamber Dynax S-50 with the cavity nozzle,
it was very satisfying to use today. £20 well spent.
a spend now will save a lot of grief later!
Ordered a Bilt Hamber Dynax S-50 with the cavity nozzle,
it was very satisfying to use today. £20 well spent.
Live as if you were to die tomorrow
Learn as if you were to live forever
Syncro Danbury 2.0 petrol AGG
Learn as if you were to live forever
Syncro Danbury 2.0 petrol AGG
- slowcoach
- Registered user
- Posts: 1579
- Joined: 06 May 2010, 10:23
- 80-90 Mem No: 8892
- Location: West Yorkshire
- Contact:
Re: Rust treatment
Is that used with a compressor?rollercoaster wrote:Yes be safe everyone,
a spend now will save a lot of grief later!
Ordered a Bilt Hamber Dynax S-50 with the cavity nozzle,
it was very satisfying to use today. £20 well spent.
===================
1984 TRAKKA Conversion Subaru EJ20 5 Speed
1984 TRAKKA Conversion Subaru EJ20 5 Speed
- rollercoaster
- Registered user
- Posts: 897
- Joined: 10 Dec 2008, 20:30
- 80-90 Mem No: 6231
- Location: Carmarthenshire Ceridigion border
Re: Rust treatment
it comes with the aerosol can, if you order one.
can also get them without, cheaper.
nice to use too as bendy pipe means can is vertical.
can also get them without, cheaper.
nice to use too as bendy pipe means can is vertical.
Live as if you were to die tomorrow
Learn as if you were to live forever
Syncro Danbury 2.0 petrol AGG
Learn as if you were to live forever
Syncro Danbury 2.0 petrol AGG
- rollercoaster
- Registered user
- Posts: 897
- Joined: 10 Dec 2008, 20:30
- 80-90 Mem No: 6231
- Location: Carmarthenshire Ceridigion border
Re: Rust treatment
forgot to say I also used the Dinitrol version of Hydrate 80,
probably the same stuff, Converust 800.
probably the same stuff, Converust 800.
Live as if you were to die tomorrow
Learn as if you were to live forever
Syncro Danbury 2.0 petrol AGG
Learn as if you were to live forever
Syncro Danbury 2.0 petrol AGG