Power lock actuator removal
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 87
- Joined: 27 Jun 2014, 15:03
- 80-90 Mem No: 0
Power lock actuator removal
Anyone know how to get access to this screw? Need to remove to repair lock pull mech....am I missing something? Can’t get access to remove last screw
Sent from my iPhone using Tapatalk
- Oldiebut goodie
- Registered user
- Posts: 7293
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Re: Power lock actuator removal
Never touched one but looking at the pic - isn't it held in by the pop rivets and the screws are holding the lock together?
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
- T3luestar
- Registered user
- Posts: 620
- Joined: 07 May 2012, 10:31
- 80-90 Mem No: 13845
- Location: Widnes
Re: Power lock actuator removal
It's a little bit tight but doable. I've managed on my van a few times. The rivets only hold the mounting plate on.
- Oldiebut goodie
- Registered user
- Posts: 7293
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Re: Power lock actuator removal
Surely that is what is needed then it is easy to access the rest of it?
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
- T3luestar
- Registered user
- Posts: 620
- Joined: 07 May 2012, 10:31
- 80-90 Mem No: 13845
- Location: Widnes
Re: Power lock actuator removal
Just found this picture, you can see that I've swapped the actuator without removing the plate. Note the mark to the paint made by the screw driver!