Hello,
I'm starting to, for some reason, to feel the need to get some nice alloy wheels on my motor..
I really like the look of these..
http://www.ebay.co.uk/itm/18-AUDI-RS8-A ... 804wt_1396
Are they compatible? Would it be much work to get them on?
or
http://www.ebay.co.uk/itm/AUDI-A3-A4-A5 ... 673wt_1396 Think the profile on the types is probably a bit too much(little) on these
18" AUDI RS8 ALLOY WHEELS
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 97
- Joined: 28 Apr 2006, 21:26
- 80-90 Mem No: 0
- Location: London / Dorset
- Titus A Duxass
- Registered user
- Posts: 5778
- Joined: 24 Nov 2007, 08:22
- 80-90 Mem No: 4475
- Location: Cologne
Re: 18" AUDI RS8 ALLOY WHEELS
These two threads from the Brickyard may answer your questions:
http://www.brick-yard.co.uk/forum/defin ... c1290.html
http://www.brick-yard.co.uk/forum/usabl ... ic596.html
http://www.brick-yard.co.uk/forum/defin ... c1290.html
http://www.brick-yard.co.uk/forum/usabl ... ic596.html
VW T3 GTi Camper 2,0l
-
- Trader
- Posts: 1342
- Joined: 11 Oct 2005, 08:30
- 80-90 Mem No: 0
- Location: Barnsley...that's oop norf!
Re: 18" AUDI RS8 ALLOY WHEELS
You'll need spacers,longer front bolts and rear studs as well as the centre bore machining out to approx 66mm.
When you've shelled out for them the ride quality will be terrible and unless they are genuine Audi wheels they'll be made from Malaysian cheese so will probably crack when you go over the 1st pot hole!
My advice is forget it and get some alloys more suited to a T25....and no bigger than 17's.
Those two links Titus has posted will help no end.
When you've shelled out for them the ride quality will be terrible and unless they are genuine Audi wheels they'll be made from Malaysian cheese so will probably crack when you go over the 1st pot hole!
My advice is forget it and get some alloys more suited to a T25....and no bigger than 17's.
Those two links Titus has posted will help no end.
There's no 'r' in bought!
-
- Registered user
- Posts: 97
- Joined: 28 Apr 2006, 21:26
- 80-90 Mem No: 0
- Location: London / Dorset
Re: 18" AUDI RS8 ALLOY WHEELS
OK I think I'm getting a better understanding of all this now..
However, do I need to stick 15" or less (http://www.ebay.co.uk/itm/Original-VW-P ... 738wt_1178) This guy is saying these 17" will fit on a T25.
I'm also thinking of lower the bus slightly, so I don't want to come into clearance problems..
Thanks loads for you help!
However, do I need to stick 15" or less (http://www.ebay.co.uk/itm/Original-VW-P ... 738wt_1178) This guy is saying these 17" will fit on a T25.
I'm also thinking of lower the bus slightly, so I don't want to come into clearance problems..
Thanks loads for you help!
-
- Trader
- Posts: 1342
- Joined: 11 Oct 2005, 08:30
- 80-90 Mem No: 0
- Location: Barnsley...that's oop norf!
Re: 18" AUDI RS8 ALLOY WHEELS
Just because someone says alloys will fit it doesn't mean they actually fit.
PLEASE
READ
THE
LINKS
POSTED
BY
TITUS
PLEASE
READ
THE
LINKS
POSTED
BY
TITUS
There's no 'r' in bought!