MY engine timing
Moderators: User administrators, Moderators
MY engine timing
Hi have a 2.1 mv engine that has a triple pulley fitted.I was wondering which Mark on which pulley do I use to time the engine up.And is setting the timing the same as a DG engine.I have fitted a carb to my engine so it's not running the fuel injection system thanks.
Re: MV engine timing
Buggy83 wrote: ↑30 Apr 2024, 16:29 Hi have a 2.1 mv engine that has a triple pulley fitted.I was wondering which Mark on which pulley do I use to time the engine up.And is setting the timing the same as a DG engine.I have fitted a carb to my engine so it's not running the fuel injection system thanks.
-
Stesaw
- Registered user
- Posts: 1937
- Joined: 10 Aug 2019, 23:30
- 80-90 Mem No: 17004
- Location: Coventry
Re: MY engine timing
The V shaped one 
1985 LeisureDrive 2.1DJ 5 Speed syncro conversion project.
1979 LT 2.0CH Westy project
1979 LT 2.0CH Westy project
Re: MY engine timing
The front and the 2nd both have a v shape in them
-
Stesaw
- Registered user
- Posts: 1937
- Joined: 10 Aug 2019, 23:30
- 80-90 Mem No: 17004
- Location: Coventry
Re: MY engine timing
TDC will be a larger U shaped notch, the v will be smaller. Take a picture and post it up here and will have a look.
The U shaped notch will on the largest pulley section closest to the block.
The U shaped notch will on the largest pulley section closest to the block.
1985 LeisureDrive 2.1DJ 5 Speed syncro conversion project.
1979 LT 2.0CH Westy project
1979 LT 2.0CH Westy project
-
Aidan
- Trader
- Posts: 6567
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: MY engine timing
Markings do vary, my SA built 1990 DJ does't have the same markings as a German assembled one