PAS Pulley Seal Question
Moderators: User administrators, Moderators
PAS Pulley Seal Question
Not the engine case pulley seal. But the one sitting behind the PAS pulley. It doesn't come with any rebuild kit, either.
I thought l had one l bought separately, but now l'm uncertain it is the correct seal? It measures slightly different from the one l removed from the crank.
Brickwerks out of stock, too.
https://brickwerks.co.uk/product/pulley ... -steering/
Has anyone got a new one and willing to measure diameter and thickness for me please?
Regards
Stuart
Seal thickness dimensions
I thought l had one l bought separately, but now l'm uncertain it is the correct seal? It measures slightly different from the one l removed from the crank.
Brickwerks out of stock, too.
https://brickwerks.co.uk/product/pulley ... -steering/
Has anyone got a new one and willing to measure diameter and thickness for me please?
Regards
Stuart
Seal thickness dimensions
MaxStu
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
- Aidan
- Trader
- Posts: 6557
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: PAS Pulley Seal Question
parts catalogue says 36x4
it might be viton rather than nitrile for the heat
it might be viton rather than nitrile for the heat
Re: PAS Pulley Seal Question
Thanks for the info. I guess that is an internal diameter at 36mm? That roughly matches pulley shaft at 37mm
The new one feels soft to the touch and l don't think is correct, especially with a 34mm ID and 42mm ED.
Trying to source one at present. But not urgent. Have set up an back in stock alert with Brickwerks.
MaxStu
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
- tobydog
- Registered user
- Posts: 1384
- Joined: 07 Mar 2009, 21:03
- 80-90 Mem No: 6484
- Location: Near Saarfend, Essex
Re: PAS Pulley Seal Question
Whats the depth of the recess it sits in?
https://simplybearings.co.uk/shop/Seals ... er+O-Rings
https://www.ebay.co.uk/itm/362921200892 ... BMwre_rrVh
https://simplybearings.co.uk/shop/Seals ... er+O-Rings
https://www.ebay.co.uk/itm/362921200892 ... BMwre_rrVh
Knowledge is power
1970 CU
1970 CU
Re: PAS Pulley Seal Question
Getting confused now.
More precise measurement...44mm od
MaxStu
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
Re: PAS Pulley Seal Question
I think it is the correct seal that is in my possession.
I checked out the listings posted by Tobydog and they do tend to come up slightly smaller dimensions than listed. A bit like timber.
Once over the crank end it will fit.
I will use this.
I checked out the listings posted by Tobydog and they do tend to come up slightly smaller dimensions than listed. A bit like timber.
Once over the crank end it will fit.
I will use this.
MaxStu
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
- tobydog
- Registered user
- Posts: 1384
- Joined: 07 Mar 2009, 21:03
- 80-90 Mem No: 6484
- Location: Near Saarfend, Essex
Re: PAS Pulley Seal Question
O rings are usually listed by ID and section
From your piccy, (44)-4-4=36
From your piccy, (44)-4-4=36
Knowledge is power
1970 CU
1970 CU
- Aidan
- Trader
- Posts: 6557
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: PAS Pulley Seal Question
my bad i and o next to each other on keyboard 36 id 4mm thick
Re: PAS Pulley Seal Question
Well, between the three of us we eventually got there...
I must have bought this seal from Brickwerks. So safe to assume it is good for the job.
I must have bought this seal from Brickwerks. So safe to assume it is good for the job.
MaxStu
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
-
- Registered user
- Posts: 48
- Joined: 09 Dec 2009, 16:43
- 80-90 Mem No: 0
Re: PAS Pulley Seal Question
Thanks very much. Yet, is it the correct size?tencentlife wrote: ↑18 Jan 2023, 23:59It's just Buna-N (nitrile). Not especially hot inside an engine, actually rather cool as hot things go. That is, if you deal with hot things. But them that don't think everything's too hot.
MaxStu
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".