Battery terminal connectors

[JeffRoo]

Thought these look good, https://www.amazon.co.uk/Terminals-Conn ... op?ie=UTF8 
has anyone had any experience? Just thinking of using them due to number of connections coming off the batteries

[multisi]

If the van has a metal battery lid those connectors could touch the underside.

[JeffRoo]

They could and it would be the same as I have now, some rubber matting between the battery and lid. 

[Oldiebut goodie]

You can get terminals that extend beyond the battery and you can make the connections below the level of the top of the battery lower than the actual battery posts. They are what I used on my T6 batteries to keep below my seat swivels.

[cobblers]

They are absolutely top grade chinesium rubbish, but they will probably work OK for low current.
If you have so many connections coming off each battery terminal that you are considering these, maybe you should tidy up the wiring and use a little fuse box/ distribution box with just a single connection to each terminal?

[Oldiebut goodie]

These are low profile:
https://www.ebay.co.uk/itm/314199189906?hash=item4927bb2992:g:6YgAAOSwdnNjFr3u&amdata=enc%3AAQAHAAAA4MHoG3peyG63%2FC2ZuiUsjQaNtkJFZdrhRi5knyKKFT899sTtD8HvPml5L2YMFWeI2u5hHS0OTGMLo%2B2RhgYACi%2Fn%2F6ZQ37sYxGw2Em9XQh%2BMSSjSXGYY1bO9eBnb%2BqaGLu4xAf1ldsWSb5JFzCOGMrzTUAenRH0sv4hL%2BqGIa587CRfDCO%2FAm79zmMcFkC1em0hGC5aQYSqJqAE1I%2FDXB0q06oYC%2B6I5p0ErW4eyXqz0aYhxcyTxispcTvbOehZCFmZ59NVyVKOFB3yfbYKj9PP4AXEzln9qEgpnlU5sdOWl%7Ctkp%3ABk9SR8aOwPP_YA

[JeffRoo]

Thanks all, I like the idea of cobblers. Just a quick question: as the connections are fused anyway, if I go down the route of a little box should the fuses be rated the same as the original fuse?