I'm currently refurbishing the interior of my T25 'project' and when dismantled I noted that the rock and roll seat doesn't have the metal hinges joining the two halves together.
Both seats have these sprung metal arms which appear to act in their place but not sure they are adequate? Have seen others listed on eBay similar.
All advice welcome! Thanks
Rock and roll bed without hinges?
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 8
- Joined: 04 Mar 2018, 21:43
- 80-90 Mem No: 0
Rock and roll bed without hinges?
- Attachments
-
- Screenshot_20200331_153929_com.ebay.mobile~4.jpg
- (82.92 KiB) Downloaded 319 times
- Mocki
- Membership Admin
- Posts: 16985
- Joined: 29 Sep 2005, 09:27
- 80-90 Mem No: 428
- Location: Mansfield Notts
- Contact:
Re: Rock and roll bed without hinges?
That’s a Autohomes style , perfectly functional , fairly common , although Autohomes were generally not trimmed with the best quality furnishings within, as they were made by CI ( Caravan International , who made Sprite caravans ) so had lots of cheap chipboard rather than voringer ply used by more expensive conversions such as leisuredrive and autosleeper
Steve
tel / txt O7947-137911
________________
1989 2.1LpgWBX HiTop Leisuredrive Camper
1988 2.1 Caravelle TS TinTop Camper
tel / txt O7947-137911
________________
1989 2.1LpgWBX HiTop Leisuredrive Camper
1988 2.1 Caravelle TS TinTop Camper
-
- Registered user
- Posts: 8
- Joined: 04 Mar 2018, 21:43
- 80-90 Mem No: 0
Re: Rock and roll bed without hinges?
Thanks Steve
Strange as it is an autosleeper, though has clearly been messed with over the years.
Kitchen and bed are being refurbished - at least that's one less thing to attend to!
Cheers, Chris
Strange as it is an autosleeper, though has clearly been messed with over the years.
Kitchen and bed are being refurbished - at least that's one less thing to attend to!
Cheers, Chris
- Mocki
- Membership Admin
- Posts: 16985
- Joined: 29 Sep 2005, 09:27
- 80-90 Mem No: 428
- Location: Mansfield Notts
- Contact:
Re: Rock and roll bed without hinges?
Let’s have some more pictures of the van then, interior and exterior .....
Steve
tel / txt O7947-137911
________________
1989 2.1LpgWBX HiTop Leisuredrive Camper
1988 2.1 Caravelle TS TinTop Camper
tel / txt O7947-137911
________________
1989 2.1LpgWBX HiTop Leisuredrive Camper
1988 2.1 Caravelle TS TinTop Camper
- Aidan
- Trader
- Posts: 6557
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: Rock and roll bed without hinges?
autohomes used nylon bushes for their version of the wire folding mechanism, those nylon blocks from the 70's/80s used to support shelves in cheap wardrobes and book cases
- AngeloEvs
- Registered user
- Posts: 1345
- Joined: 22 Nov 2007, 19:22
- 80-90 Mem No: 4709
- Location: Upwell, Norfolk
Re: Rock and roll bed without hinges?
I thought about replacing mine (Autohomes) with the metal framed RnR type but when I compared the dimensions It would have resulted in less space as the the Autohomes design fits further back. The seat is also slightly higher which I prefer.
The main problem I found with the Autohomes rear seat being further rearwards is when fitting rear seat belts which requires that the short belt (that has the receiver) must also be fitted further back.
The main problem I found with the Autohomes rear seat being further rearwards is when fitting rear seat belts which requires that the short belt (that has the receiver) must also be fitted further back.
1987 DG Karisma LPG with remodelled interior