Club 80-90 Forums

No, easier to adjust with it off.

see James Akers video on youtube search pierburg 2e3 and it will come up.

M

Just to udpdate.

Whilst dismantling the carb, I found that the plastic part where the choke lever connects to the cam that moves the choke plate has broken. Probably why I can't change the choke plate gap!

Gower & Lee have confirmed: Sorry but this part is no longer available. It was sold in a repair kit with the choke spindle, screws & plastic choke clip.

So any suggestions on what to do next?

Finances at the moment won't stretch to a new carb, so get a used one and use the best bits from both carbs?
If Gower & Lee say the part is NLA, surely nowhere else will be able to get it?

Thanks for any advice.

ask Bromyard VW if they can help ?

...have you got a pic of the bit?
David.

Is it this bit? http://forum.club8090.co.uk/viewtopic.p ... t#p8210907" onclick="window.open(this.href);return false;
David.

jrt wrote:...have you got a pic of the bit?
David.

Sorry, I didn't think of posting a pic.

Just need to resize them as forum says images are too big.

jrt wrote:Is it this bit? http://forum.club8090.co.uk/viewtopic.p ... t#p8210907" onclick="window.open(this.href);return false;
David.

Thanks for the suggestion, but no it isn't.
I'll get some pictures posted as soon as I've worked out to resize them.

Hopefully you can make out the image in enough detail?

http://forum.club8090.co.uk/viewtopic.p ... r#p8111132" onclick="window.open(this.href);return false;
David.

Have a look at this
http://forum.club8090.co.uk/viewtopic.p ... 5#p8124746" onclick="window.open(this.href);return false;

Sent from my ONEPLUS A3003 using Tapatalk

Ha! Snap!

Sent from my ONEPLUS A3003 using Tapatalk

ajsimmo wrote:Ha! Snap!

Sent from my ONEPLUS A3003 using Tapatalk

I'd been searching for it, i knew i'd seen Chris had made some up before
David.

Thanks for the replies, looks like the part might be available again?

Drop CJH a pm and see if he can help
David.