Early Diesel - Harness connections and black box
Posted: 30 Jul 2018, 07:41
Hi
Looking for some advice on the loom for my van.. 1982 1.6CS - using the RJES kit to install a Subaru Legacy EJ20
Im going subaru from a 1.6 CS - so part of the conversion is adapting the subaru loom to interface (plug n play) with the needed wires from the VW loom. Richard from RJES does the work on the loom and to complete the loom conversion sends a PDF photos with all known options of connectors contained in the black box bolted to chassis. Ons different for petrol/diesel/early/late models .
Customer then says which type he /she has and matching connectors added to Subaru loom. Simple !
My problem is that the connectors in my black box don't match with any this he has seen although they are def undisturbed factory
Might it be that v early diesels didnt have connector multi pin plugs, and wires went straight from loom to the components - alternator/solenoid/guages ?
Electrics are not my strong point so any help to describe to Richard accurately what I have and how he can adapt the needed connections would be appreciated.
Best
Matt
Looking for some advice on the loom for my van.. 1982 1.6CS - using the RJES kit to install a Subaru Legacy EJ20
Im going subaru from a 1.6 CS - so part of the conversion is adapting the subaru loom to interface (plug n play) with the needed wires from the VW loom. Richard from RJES does the work on the loom and to complete the loom conversion sends a PDF photos with all known options of connectors contained in the black box bolted to chassis. Ons different for petrol/diesel/early/late models .
Customer then says which type he /she has and matching connectors added to Subaru loom. Simple !
My problem is that the connectors in my black box don't match with any this he has seen although they are def undisturbed factory
Might it be that v early diesels didnt have connector multi pin plugs, and wires went straight from loom to the components - alternator/solenoid/guages ?
Electrics are not my strong point so any help to describe to Richard accurately what I have and how he can adapt the needed connections would be appreciated.
Best
Matt