Speedo Bounce
Moderators: User administrators, Moderators
- dumbo
- Registered user
- Posts: 477
- Joined: 24 Jan 2012, 20:21
- 80-90 Mem No: 10625
- Location: burwell cambridgeshire
Re: Speedo Bounce
my gemo cable was oil and a new wheel bearing cap cover fitted its always been like that but holding the cable sorts it? but after 30 onwards it stops and the speeds are good to
1986 DG WBX AUTOHOMES kamper
- Oldiebut goodie
- Registered user
- Posts: 7312
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Re: Speedo Bounce
I used a Gemo replacement a couple of years ago and have had no issues with it whatsoever. Luck of the draw maybe?
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: Speedo Bounce
Interesting, did you oil it first?Oldiebut goodie wrote:I used a Gemo replacement a couple of years ago and have had no issues with it whatsoever. Luck of the draw maybe?
937carrera wrote:The problem with oiling as a solution, apart from getting the stuff in is it depends what the liner is made of and will it swell in some way, defeating the object ?
just wondering if oil is the cause not the solution?
-
- Registered user
- Posts: 2531
- Joined: 16 Aug 2012, 13:05
- 80-90 Mem No: 12017
- Location: Sidcup, Kent
Re: Speedo Bounce
Paul, have you tried driving about with the binnacle off and making slight adjustments to the cable as it goes in the back of the speedo to see if this makes any difference? You can then see if there is a point where the bouncing stops and try to hold the connection there.
'86 DG, Weber Carb
Re: Speedo Bounce
My gemo was fine for a few months,but started bouncing below 30mph a few weeks ago.
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
"The difference between genius and stupidity is that genius has its limits"
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: Speedo Bounce
300CE wrote:Paul, have you tried driving about with the binnacle off and making slight adjustments to the cable as it goes in the back of the speedo to see if this makes any difference? You can then see if there is a point where the bouncing stops and try to hold the connection there.
yep spent 400 miles doing that on the trip to France, had the binicle of and kept turning and adjusting, also kept stopping and taking grill off and pushing it in an out a bit to see if it was the path behind dash and it did make a difference but never cured it.
Thats when I got the idea it could be the long supporting tube and I cut it down then removed it altogether, better at speed but still bounced heavily at lower speeds.
When the bounce is too high the speedo starts chirping and thats a concern that it will long term kill the speedo.
I feel holding the cable is not the solution becuse it's alsmost impossible to get in behind the speedo and find something thats solid to clamp it to, also pulling on the cable means that you are probabbly pulling on the speedo.
I did montion that how far the outer is pushed into the hub also made a difference in my drill test but I never road tested it
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: Speedo Bounce
R0B wrote:My gemo was fine for a few months,but started bouncing below 30mph a few weeks ago.
yes same for me they were OK when fitted but no longer are, did you oil yours before fitting?
Rob do you feel like trying a test?
Get under and pull the outer from the hub with the inner in place, good hard tug ( snigger) this makes the inner sit down into the connector at the top.
Re: Speedo Bounce
No i didnt oil before fitting.Will try tugging it later.
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
"The difference between genius and stupidity is that genius has its limits"
-
- Registered user
- Posts: 4569
- Joined: 15 Oct 2010, 21:55
- 80-90 Mem No: 8927
- Location: London
Re: Speedo Bounce
R0B wrote:No i didnt oil before fitting.Will try tugging it later.
Honorary "Dave"
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: Speedo Bounce
R0B wrote:No i didnt oil before fitting.Will try tugging it later.
Great so thats the oil damaging the inside theory out.
I'm thinking they should be oiled as they make tools for the job and by not oiling the inside gets abraided causing permanent damage, just a theory at the moment.
Re: Speedo Bounce
For the record i fitted a new grease cap when i replaced the cable, thinking the cap might be the cause of the bounce with the old cable.
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
"The difference between genius and stupidity is that genius has its limits"
Re: Speedo Bounce
I fitted a Gemo cable almost 5000 miles ago, and it's still working perfectly - no bounce at any speed. I *DID* oil it before fitting.
"I'm a man of means, by no means....King of the Road!"
1983 Viking Xplorer, 2.1DJ
1983 Viking Xplorer, 2.1DJ
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: Speedo Bounce
CJH wrote:I fitted a Gemo cable almost 5000 miles ago, and it's still working perfectly - no bounce at any speed. I *DID* oil it before fitting.
Thanks for the vote Chris, how did you oil it?
I dripped a bit in but it seems thats not enough.
Re: Speedo Bounce
I gripped it in the jaws of my workbench, say 75cm above the ground, and I dribbled a bit of engine oil in several times over the course of an hour or so. Did both ends. I didn't use anything as a funnel, so I don't think it will have taken very much oil. Maybe I was lucky and have ended up with the inner pulled short.
"I'm a man of means, by no means....King of the Road!"
1983 Viking Xplorer, 2.1DJ
1983 Viking Xplorer, 2.1DJ
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: Speedo Bounce
I'm still leaning towards lack of oil as the cause because of the two I fitted at a similar time one was oiled better than the other and has been better and lasted longer before bouncing.