Page 1 of 1
WBX Tinware ?
Posted: 28 Apr 2018, 14:47
by Cobra88
Hi All
Is it safe to remove the tinware from under the pushrod tubes and drive the Van ?
That way I can keep an eye out for leaks easier.
Regards
Rick
Re: WBX Tinware ?
Posted: 28 Apr 2018, 16:17
by itchyfeet
Yeh for a while but it's mote risky if you drive off paved roads.
had none on my tin top for a month or two now, must put them back.
Re: WBX Tinware ?
Posted: 28 Apr 2018, 16:19
by Cobra88
Hi itchyfeet
I don't want to have to keep taking manifold nuts off & on each time to check.
I might make some modded brackets that separate away from those studs I think
Thanks for the reply
Regards
Rick
Re: WBX Tinware ?
Posted: 28 Apr 2018, 16:25
by CovKid
In the past, particularly with bugs, I've cut and made ally tinware to protect pushrod tubes, They don't rust and tend to be way easier to remove.
Re: WBX Tinware ?
Posted: 28 Apr 2018, 16:45
by itchyfeet
Cobra88 wrote:Hi itchyfeet
I don't want to have to keep taking manifold nuts off & on each time to check.
take the manufold nuts off once then hook them over later, I never fit them under the nuts always hook on then they are removable easily
P1060003 by
Paul_Barr, on Flickr
Re: WBX Tinware ?
Posted: 28 Apr 2018, 17:48
by Cobra88
Great tip