Page 1 of 1

T4 cab seats in T25

Posted: 01 Sep 2017, 21:41
by Johnmck
Hi have tried searching but cannot find answer.
Can you simply fit a T4 seat into t25? and if so can you use t4 swivel?
thanks

Re: T4 cab seats in T25

Posted: 02 Sep 2017, 02:45
by scaltura
Sure can, this is what I have.

Take runners off the swivel and attach seats to the swivel :ok

Re: T4 cab seats in T25

Posted: 02 Sep 2017, 22:03
by what2do
Works for me too.

Re: T4 cab seats in T25

Posted: 02 Sep 2017, 22:09
by sternal
Early ones fit straight in, may need to trim the runners to fit.

I have one fitted way more comfy than original seat

Re: T4 cab seats in T25

Posted: 02 Sep 2017, 23:54
by AngeloEvs
sternal wrote:Early ones fit straight in, may need to trim the runners to fit.

I have one fitted way more comfy than original seat


Do they fit into the T25 runners then (apart from trimming them down) and what is "early"?

Re: T4 cab seats in T25

Posted: 03 Sep 2017, 13:34
by sternal
I don't know cross over dates but the 1st few years then runners changed I believe, all info was on 8090 will try and find links later.

Re: T4 cab seats in T25

Posted: 03 Sep 2017, 16:51
by AngeloEvs
sternal wrote:I don't know cross over dates but the 1st few years then runners changed I believe, all info was on 8090 will try and find links later.

:ok

Re: T4 cab seats in T25

Posted: 03 Sep 2017, 19:07
by sternal
Answers here

https://www.thesamba.com/vw/forum/archi ... index.html" onclick="window.open(this.href);return false;

Re: T4 cab seats in T25

Posted: 03 Sep 2017, 20:45
by what2do
10 minutes with a grinder and they slip straight in.

Re: T4 cab seats in T25

Posted: 03 Sep 2017, 20:56
by dumbo
:roll: now now :rollin

Re: T4 cab seats in T25

Posted: 30 Sep 2017, 22:12
by adie89
Lots more info here too
https://www.thesamba.com/vw/forum/viewt ... t&start=40" onclick="window.open(this.href);return false;

Re: T4 cab seats in T25

Posted: 17 Oct 2017, 16:32
by Johnmck
Hi
have now got set of t4 seats -one with swivel. However they have the rails attached. How do i seperate the rails and runners is there an easy way or is it a grind off the tabs on the end of the rails ( the bit that would be fixed to the van in the t4?
to attach the swivel do i just drill holes through the existing rails on the T25 and bolt through to under the wheel arch as the bit the rails sit on is a closed section?
Sorry if this all sounds like simple stuff but i dont want to ruin a set of seats.

Thanks
John

Re: T4 cab seats in T25

Posted: 17 Oct 2017, 21:10
by sternal
Can you post pictures of underside of T4 seats ?

Re: T4 cab seats in T25

Posted: 18 Oct 2017, 12:08
by what2do
If you have the rails and runners I'd just unbolt the ones from the van and bolt the T4 ones in.

Re: T4 cab seats in T25

Posted: 19 Oct 2017, 12:45
by bene
I have a set of late T4 seats in my van...
it took a bit of fettling but i removed the T4 specific runners and bolted on the original seat runners.
Its a bit of a pain but they are comfy, have adjustable arm rests and in total ended up being less than half the price of a decent set of T3 captain seats.