Club 80-90 Forums

Hi, can anyone tell me how to remove the lowermost part of the dash board. The piece directly in front of the gearstick and below the heater sliders. Do I just pull it? I can't see any retaining screws anywhere.

Thanks for your help.

It just pulls off.
But the plastic is quite old now so do it gently.

Thanks tight

It slides..theres a little plastic lip on each side in a little runner ..so it pulls off just like opening a drawer

Sent from my SM-G935F using Tapatalk

And if you have a diesel you need to remove the j shaped segment of the dash that the cold start handle lives in, this screws in from below.

Yes that is right and mine has an ungodly spaghetti junction of wires tucked up behind it which defy tidying up for fear of the nothing working again or the whole bunch catching fire
Well maybe I am exaggerating but...
CS

Campermad wrote:It slides..theres a little plastic lip on each side in a little runner ..so it pulls off just like opening a drawer

Sent from my SM-G935F using Tapatalk

Not the one on mine, i had to push the bottom edge of the metal dash board in to release it . Was wedged in solid.

multisi wrote:

Campermad wrote:It slides..theres a little plastic lip on each side in a little runner ..so it pulls off just like opening a drawer

Sent from my SM-G935F using Tapatalk

Not the one on mine, i had to push the bottom edge of the metal dash board in to release it . Was wedged in solid.

Really ? Oh sorry i assumed it slide out..and yes expose a frightening spagetti mess like mine

Sent from my SM-G935F using Tapatalk