Hi all,
Does anyone know where you can get hold of the drop side pins other than VW, anyone doing stainless steel ones.
I have a syncro pickup and have replaced the rail's that the drop sides pivot on but had to cut the old pins off on the drop sides to get them off as they where rusted solid.
drop side pins
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 36
- Joined: 11 Nov 2007, 01:01
- 80-90 Mem No: 0
- Location: East Anglia
- ..lee..
- Registered user
- Posts: 733
- Joined: 04 Jun 2006, 22:13
- 80-90 Mem No: 4478
- Location: llanelli, s wales
Re: drop side pins
baxter does the specific stainless bolt kit for them.
it`s a big round cage and there`s too many animals in it for my liking. To help address this ring lee on 07977 765818.
- syncro up
- Registered user
- Posts: 212
- Joined: 09 Aug 2007, 18:57
- 80-90 Mem No: 3981
- Location: Scotland
Re: drop side pins
more speed wrote:Hi all,
Does anyone know where you can get hold of the drop side pins other than VW, anyone doing stainless steel ones.
I have a syncro pickup and have replaced the rail's that the drop sides pivot on but had to cut the old pins off on the drop sides to get them off as they where rusted solid.
Just out of Interest, did you manage to get the pins out the gates without using heat? Would be interested to know how as thinking it would be nice to have removable gates but don't want to ruin the paint.
Life is like a roll of toilet paper
The closer it gets to the end, the faster it goes...
Todays might Oak is just yesterdays nut which held its ground!
'87 Rhd 2.1 Syncro Moonraker
'91 Rhd AAZ Syncro Sika
'03 Merlin Syncro Expedition Trailer
The closer it gets to the end, the faster it goes...
Todays might Oak is just yesterdays nut which held its ground!
'87 Rhd 2.1 Syncro Moonraker
'91 Rhd AAZ Syncro Sika
'03 Merlin Syncro Expedition Trailer
- ..lee..
- Registered user
- Posts: 733
- Joined: 04 Jun 2006, 22:13
- 80-90 Mem No: 4478
- Location: llanelli, s wales
Re: drop side pins
air chisel and lots of patience and wd40.
it`s a big round cage and there`s too many animals in it for my liking. To help address this ring lee on 07977 765818.
-
- Registered user
- Posts: 1931
- Joined: 21 Feb 2012, 21:47
- 80-90 Mem No: 0
- Location: lancaster uk
Re: drop side pins
..lee.. wrote:air chisel and lots of patience and wd40.
And noise..
- hugomonkey
- Registered user
- Posts: 1030
- Joined: 26 Apr 2011, 05:29
- 80-90 Mem No: 10485
- Location: Denmark
Re: drop side pins
and then after you have deformed the hinges you give up and using a thin cutting disc cut first through the pins and then with the sides off cut along the length of the sleeve after which the pins will pop out with a light tap, then you weld up the cut and paint
Regards Jason
http://www.youtube.com/watch?v=kHp3lQKS6lo" onclick="window.open(this.href);return false;
http://www.youtube.com/watch?v=kHp3lQKS6lo" onclick="window.open(this.href);return false;
Re: drop side pins
no need to deform anything just take your time drill through center of pin, take junior hacksaw blade remove a section of pin...drift out pin it will collapse and come out
80-90 Mem#:1926
Syncronaut Mem#:66
Syncronaut Mem#:66
-
- Registered user
- Posts: 878
- Joined: 25 May 2008, 09:41
- 80-90 Mem No: 10335
- Location: folkestone, kent
Re: drop side pins
Nice work xriss, ^^
-
- Registered user
- Posts: 36
- Joined: 11 Nov 2007, 01:01
- 80-90 Mem No: 0
- Location: East Anglia
Re: drop side pins
Hi Guys,
Cheers for the info.
I did the same as kriss, drilled and tapped out.
Cheers for the info.
I did the same as kriss, drilled and tapped out.