They do state in their description manufactured by Schofield's but its only £10 from Brickwerks not sure how much it is from Schofield's???bluebus1987 wrote:http://www.brickwerks.co.uk/index.php/t ... lower.html
Showing out of stock but worth a try.
Easy to forget they do panels.
Sliding door Sill Seal Repair channel
Moderators: User administrators, Moderators
- Cyrus
- Registered user
- Posts: 616
- Joined: 22 Jan 2011, 09:26
- 80-90 Mem No: 9165
- Location: Hastings, E/Sussex
Re: Sliding door Sill Seal Repair channel
-
- Registered user
- Posts: 671
- Joined: 01 Feb 2010, 10:23
- 80-90 Mem No: 7803
- Location: birmingham
Re: Sliding door Sill Seal Repair channel
Does anyone have the dimensions of this channel,I've just looked at mine and channel is gone the rubber is glued to body.I can fabricate a few.
-
- Registered user
- Posts: 804
- Joined: 09 Aug 2009, 21:53
- 80-90 Mem No: 8265
- Location: County Monaghan, Ireland
Re: Sliding door Sill Seal Repair channel
The new one that I bought is...
Outside measurements if using 1mm steel - 11mm deep x 14mm high
Inside measurements 10mmm deep x 12mm high
Outside measurements if using 1mm steel - 11mm deep x 14mm high
Inside measurements 10mmm deep x 12mm high
1984 1.9D (AEF Code) T25 tintop
-
- Registered user
- Posts: 671
- Joined: 01 Feb 2010, 10:23
- 80-90 Mem No: 7803
- Location: birmingham
Re: Sliding door Sill Seal Repair channel
Thanks boatbuilder what length is it.
-
- Trader
- Posts: 8047
- Joined: 12 Oct 2005, 20:55
- 80-90 Mem No: 1948
- Location: lincolnshire
Re: Sliding door Sill Seal Repair channel
46"along the bottom
mm
mm
-
- Registered user
- Posts: 671
- Joined: 01 Feb 2010, 10:23
- 80-90 Mem No: 7803
- Location: birmingham
Re: Sliding door Sill Seal Repair channel
Thanks mm .
Re: Sliding door Sill Seal Repair channel
Check out eBay item 201136822765. This could be what your after.
Davina - 1981 Air Cooled 2.0l Petrol T25 Sheldon High Top
-
- Trader
- Posts: 8047
- Joined: 12 Oct 2005, 20:55
- 80-90 Mem No: 1948
- Location: lincolnshire
Re: Sliding door Sill Seal Repair channel
ah miss Mc call or galitza
mm
mm
-
- Registered user
- Posts: 2824
- Joined: 05 Oct 2012, 08:55
- 80-90 Mem No: 11974
- Location: Salisbury
Re: Sliding door Sill Seal Repair channel
enzuk1 wrote:Check out eBay item 201136822765. This could be what your after.
That's the one I was thinking of!
Why would the glass be anything other than half full?
'89 panel van, 1.9 DG.
'89 panel van, 1.9 DG.
- Oldiebut goodie
- Registered user
- Posts: 7311
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Re: Sliding door Sill Seal Repair channel
vmi51314 wrote:When we purchased the van the sill was broken, rotten and a piece of the sliding door seal had fallen off
Obviously this was allowing water and dirt from the road to get into the sill and the sliding door skin. It needed to be fixed.
To remedy this I purchased a length of channelling as near as I could to the same thickness of the channel on the sill that held the rubber seal in place. I then angle ground the sill flat up to the point where the sill channel had broken, primed it, pop riveted the channel to the sill, then painted it. A secondhand sliding door seal was obtained for £5 and I used just the lower part to replace the entire lower length of the seal. Job done!
Above post plagiarized from http://homepage.ntlworld.com/georgina_s ... _sill.html
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
- Oldiebut goodie
- Registered user
- Posts: 7311
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Re: Sliding door Sill Seal Repair channel
cjenifer123 wrote:Obviously this was allowing water and dirt from the road to get into the sill and the sliding door skin. It needed to be fixed.To remedy this I purchased a length of channeling as near as I could to the same thickness of the channel on the sill that held the rubber seal in place. I then angle ground the sill flat up to the point where the sill channel had broken, primed it, pop riveted the channel to the sill, then painted it. A secondhand sliding door seal was obtained for £5 and I used just the lower part to replace the entire lower length of the seal. Job done!
Above post plagiarized from http://homepage.ntlworld.com/georgina_s ... _sill.html
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶