Centre Bearing Channel for sliding door

Thin bits of metal and bright blue light. Including glass & trim.

Moderators: User administrators, Moderators

Post Reply
Stu-cam
Registered user
Posts: 2
Joined: 04 Jul 2018, 10:12
80-90 Mem No: 0

Centre Bearing Channel for sliding door

Post by Stu-cam »

Hi All

We have recently bought a 1983 Air Cooled T25 up here in East Kilbride, we are proceeding with a restoration, replacing a lot of panels. One part we are stuck with is the channel that the Sliding Door Centre bearing runs along, behind the side cover. I suspect that the window seal has been leaking and the panel has rotted through from the inside right through the channel. My mechanic is completing the bodywork repairs and advises that he can rebuild the panel but we need a new channel to weld onto it.

The part is not sold by JK, VWH or Brickwerks and I have tried AHSchofield with no success. I have tried a couple of breakers but I'm waiting for a reply. Can anyone advise where I could source one.

Thanks

Stuart

scunnerd25
Registered user
Posts: 139
Joined: 26 Jul 2012, 19:56
80-90 Mem No: 17639
Location: Bonnybridge

Re: Centre Bearing Channel for sliding door

Post by scunnerd25 »

Still no luck ?

mshaw1980
Registered user
Posts: 588
Joined: 10 Aug 2015, 06:50
80-90 Mem No: 14800
Location: Peel, Isle of Man

Re: Centre Bearing Channel for sliding door

Post by mshaw1980 »

You need to go through the VW Heritage web site and on to their Classic Parts section (click the little blue emblem next to 'VW Heritage' at the top of the page).

The part number on my receipt is C252-843-871/A but this now 'corrects' to 252843341A on their web site. Although there is no picture, the description appears to be the correct item.

I asked this previously and the answer above is what I was given


Hope this helps
1987 VW T25: Subaru EJ20 using RJES parts (If it was meant to go fast it wouldn't be brick shaped!)

mshaw1980
Registered user
Posts: 588
Joined: 10 Aug 2015, 06:50
80-90 Mem No: 14800
Location: Peel, Isle of Man

Re: Centre Bearing Channel for sliding door

Post by mshaw1980 »

Also. Plasticman on here makes a brilliant reproduction of the panel that the sliding door rail welds to. I bought one off him. Much easier and cheaper than trying to fabricate :ok
1987 VW T25: Subaru EJ20 using RJES parts (If it was meant to go fast it wouldn't be brick shaped!)

multisi
Registered user
Posts: 1725
Joined: 03 Apr 2016, 12:01
80-90 Mem No: 12
Location: jersey

Re: Centre Bearing Channel for sliding door

Post by multisi »

mshaw1980 wrote:You need to go through the VW Heritage web site and on to their Classic Parts section (click the little blue emblem next to 'VW Heritage' at the top of the page).

The part number on my receipt is C252-843-871/A but this now 'corrects' to 252843341A on their web site. Although there is no picture, the description appears to be the correct item.

I asked this previously and the answer above is what I was given


Hope this helps
That's not correct, part number 252843871A is the later style middle channel, it is not available from VW Heritage and the part 252843341A is a part of the hinge not the channel that is welded to the side. Stu-cam wants an early style channel which doesn't seem to be handed so can be used for rhd and lhd , I have sent him a private message after finding a shop that may have the early one in stock.
1992 red lle 2.2 subaru 1990 rhd caravelle 2.2 subaru 1986 california import vanagon

mshaw1980
Registered user
Posts: 588
Joined: 10 Aug 2015, 06:50
80-90 Mem No: 14800
Location: Peel, Isle of Man

Re: Centre Bearing Channel for sliding door

Post by mshaw1980 »

multisi wrote:
mshaw1980 wrote:You need to go through the VW Heritage web site and on to their Classic Parts section (click the little blue emblem next to 'VW Heritage' at the top of the page).

The part number on my receipt is C252-843-871/A but this now 'corrects' to 252843341A on their web site. Although there is no picture, the description appears to be the correct item.

I asked this previously and the answer above is what I was given


Hope this helps

That's not correct, part number 252843871A is the later style middle channel, it is not available from VW Heritage and the part 252843341A is a part of the hinge not the channel that is welded to the side. Stu-cam wants an early style channel which doesn't seem to be handed so can be used for rhd and lhd , I have sent him a private message after finding a shop that may have the early one in stock.

I submit to your superior knowledge :ok

Plasticman's panel is great though :D
1987 VW T25: Subaru EJ20 using RJES parts (If it was meant to go fast it wouldn't be brick shaped!)

Post Reply