Early roller replacement

Thin bits of metal and bright blue light. Including glass & trim.

Moderators: Moderators, User administrators

Early roller replacement

Postby blakeys80 » 01 Jul 2018, 17:57

One of today's jobs was to clean up the area under the sliding door cover. To get at it fully, I swung the door out of the way and thought I'd inspect the roller too.
I'd like to replace all the rollers ideally, does anyone know how I can remove and then replace the roller from the middle hinge in the picture, and which ones (part numbers) I'd need to replace the others? The van has an 84 door with long handle. Ahh, and one last thing, should there be something attached to the two threaded holes in the picture, as there isn't at the moment.

Cheers in advance, Ross.ImageImageImage

Sent from my Moto G (5) Plus using Tapatalk

1981 LHD 2.0l CU with Twin Solex setup.
blakeys80
 
Posts: 82
Joined: 06 Jun 2016, 14:49
Location: Stourbridge
80-90 Mem No: 15374

Re: Early roller replacement

Postby DoubleOSeven » 02 Jul 2018, 09:30

1984 Caravelle 2.1 MV
User avatar
DoubleOSeven
 
Posts: 1160
Joined: 25 Jul 2014, 21:10
Location: Reading, England
80-90 Mem No: 14520

Re: Early roller replacement

Postby blakeys80 » 02 Jul 2018, 11:20

DoubleOSeven wrote:https://youtu.be/M5UrduOCJws

Thanks for the link, I had seen it from searching the forum previously, however, that's the later hinge which is completely different, the vertical wheel on the early one isnt held in by a nut, its inside the hinge, held in with a pin of some description which I'm guessing you drill out and replace. Ta

1981 LHD 2.0l CU with Twin Solex setup.
blakeys80
 
Posts: 82
Joined: 06 Jun 2016, 14:49
Location: Stourbridge
80-90 Mem No: 15374

Re: Early roller replacement

Postby DoubleOSeven » 02 Jul 2018, 12:17

Pesky early vans. Can you see the detail on realoem.me? May help.


Sent from my iPhone using Tapatalk
1984 Caravelle 2.1 MV
User avatar
DoubleOSeven
 
Posts: 1160
Joined: 25 Jul 2014, 21:10
Location: Reading, England
80-90 Mem No: 14520

Re: Early roller replacement

Postby multisi » 02 Jul 2018, 16:53

The 2 holes are for the latch to keep the door closing when on a slope. There are early and late latches, I have an early one but has no spring. I also have a new nylon guide block, if you want that I will throw in the early latch. Brickwerks do the early vertical roller - 251843361 .
1992 red lle 2.2 subaru 1990 rhd caravelle 2.2 subaru 1986 california import vanagon
multisi
 
Posts: 1134
Joined: 03 Apr 2016, 12:01
Location: jersey
80-90 Mem No: 0

Re: Early roller replacement

Postby blakeys80 » 10 Jul 2018, 07:04

Cheers for the heads up, good news is I have found the stay open latch at the bottom of a very big box, with lots of other door related bits [THUMBS UP SIGN] I left the roller in penetrating oil overnight and gave it a thorough cleaning up, it's much smoother, and spins freely, so it's on the 'to do' as apose to 'really imperative to do to use the van this summer' list! [GRINNING FACE WITH SMILING EYES]
PS I realise the catch is the wrong way round, I got over excited when I found it. ImageImage

Sent from my Moto G (5) Plus using Tapatalk

1981 LHD 2.0l CU with Twin Solex setup.
blakeys80
 
Posts: 82
Joined: 06 Jun 2016, 14:49
Location: Stourbridge
80-90 Mem No: 15374


Return to Bodywork, Seats & Glass

Who is online

Users browsing this forum: No registered users and 8 guests