Trying to remove my glove box, had a look at this video:
https://www.youtube.com/watch?v=tJrY9QEiV9I
but I cannot really work out what I need to get the clips to bend past any help would be gratefully received! If I had to bend the clips as far as I think I need to it looks like they might snap.
I have read this post as well: http://forum.club8090.co.uk/viewtopic.p ... l#p8147617 So I think i just need to take another look and good forcefully but carefully!
Glove box removal
Moderators: User administrators, Moderators
Glove box removal
1.9 DG petrol and open loop LPG Autosleeper Hightop. 1988
Re: Glove box removal
They will bend far enough. But they also snap. I have had it happen with two different ones, i put it down to going brittle with age.
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
"The difference between genius and stupidity is that genius has its limits"
Re: Glove box removal
Thanks
I managed to do it it was a lot tighter on the left-hand side than the right.
Thanks again
I managed to do it it was a lot tighter on the left-hand side than the right.
Thanks again
1.9 DG petrol and open loop LPG Autosleeper Hightop. 1988
- CovKid
- Trader
- Posts: 8409
- Joined: 30 Apr 2006, 13:19
- 80-90 Mem No: 3529
- Location: Ralph - Coventry (Retired)
- Contact:
Re: Glove box removal
Like most plastic that has the potential to snap, light warming with a hair dryer tends to avoid damage.
Roller paint your camper at home: http://roller.epizy.com/55554/" onclick="window.open(this.href);return false; for MP4 download.
Re: Glove box removal
They only need to bend in slightly to line up with a notch in the surround - get a little mirror in there and take a look!
1989 2.1 MV Auto