head off 1.6 jx

Post by **89wedge** » 10 May 2016, 06:37

hi all finally got me head off 1.6 jx

and its warped so i have a 3 hole gasket if i get head skimmed what size gasket will i need to fit all info much appreciated

Post by **Oldiebut goodie** » 10 May 2016, 10:01

VW says that you mustn't skim the heads!
The thickness of the gasket is governed by the protrusion of the piston with an unskimmed head, 3 holes/grooves should be the thickest you can get for protrusion of 0.91 - 1.03mm.

Post by **89wedge** » 10 May 2016, 15:33

hi cheers thats what i had read on here, but a few seem to have done this with no problems . maybe i will have it checked to see how much it is warped and report back

Post by **kevtherev** » 10 May 2016, 18:18

89wedge wrote:hi cheers thats what i had read on here, but a few seem to have done this with no problems . maybe i will have it checked to see how much it is warped and report back

who are these few?

set in stone, no head skimming on dervs without combustion chambers!

Post by **89wedge** » 11 May 2016, 05:30

cheers for reply that's good enough for me new head it is then

Post by **dave friday** » 11 May 2016, 10:21

Had mine done in the uk...it will bring the valves closer to the Pistons !!

Club 80-90 Forums

head off 1.6 jx

head off 1.6 jx

Re: head off 1.6 jx

Re: head off 1.6 jx

Re: head off 1.6 jx

Re: head off 1.6 jx

Re: head off 1.6 jx