Best exhaust for a 1Y engine

[Jonnyb416]

Hi all, could anyone please point me in the right direction of which exhaust is best for a van with a 1Y engine?

Mine has cracked a few times near the main exhaust box, been welded one or twice but now think it may be worth getting something new as the exhaust is pretty old I think.

Any thoughts appreciated. Thanks, Jon.

[kit]

I used the one that was fitted to the old CS 1.6d.

[gary1998]

i got a brand new freebe from a seat inca does the job

[Jonnyb416]

Thank you both. I wonder if a new original one is worth getting rather than keep welding this old one.

[kit]

I have had mine fitted since 2004 and it has been fine.

[Jonnyb416]

Mine may be really old or possibly fitted wrong. Will throw some pictures up later. Must be a reason why it's cracking so often!

[Jonnyb416]

Here's the offending split. Looks like it's going at the weakest part ie the rusty bit.
[img]http://i1197.photobucket.com/albums/aa440/jonnyb416/Mobile%20Uploads/20160315_180236.jpg[/img]

[Oldiebut goodie]

Can't see much from that but going from that split - is the silencer mounted directly to the bracket instead of the correct rubber mounts being used like this: (hard to see but is the only pic to hand). It shouldn't be hard mounted to the chassis as something will crack - like that.



found a diagram

[Jonnyb416]

I am not too sure about the rubber part but I will check it out tomorrow. Thanks for that

[Jonnyb416]

Well I certainly cannot see anything that resembles a rubber/metal bracket.

Could anyone please point me in the direction of where I may buy one from? Save me welding it and it cracking again. Thanks, Jon.

[Oldiebut goodie]

https://www.brickwerks.co.uk/catalogsea ... +mounting+

[Jonnyb416]

https://www.brickwerks.co.uk/catalogsea ... +mounting+

Thanks I'm getting it a bit now! May have to save for a new system. Patch up for now though. I think there's just a piece of steel box section where that rubber/metal bracket should be. Too dark to check now, job for the morning.

[Jonnyb416]

Here's a picture from underneath. Is that piece of steel box section with the bolts going through where the rubber/metal bracket should be?



And this what should be in its place?
https://www.brickwerks.co.uk/t3-parts/t ... nting.html" onclick="window.open(this.href);return false;

Thank you, Jon.

[Oldiebut goodie]

LHS like this - mount on left of pic.



RHS



the insulating rubber mounts go between the plates that are attached to the engine and the plates attached to the silencer.