Any tips on fitting these please?
Thanks
G
Fitting window scrapers
Moderators: User administrators, Moderators
Fitting window scrapers
T25 1.9 Petrol 1985 Homebrew
- Titus A Duxass
- Registered user
- Posts: 5778
- Joined: 24 Nov 2007, 08:22
- 80-90 Mem No: 4475
- Location: Cologne
Re: Fitting window scrapers
Measure twicw, cut once.
Otherwise it's straightfoward.
Otherwise it's straightfoward.
VW T3 GTi Camper 2,0l
Re: Fitting window scrapers
Many thanks, is it just a matter of pulling the old one out with a pliers for e.g?Titus A Duxass wrote:Measure twicw, cut once.
Otherwise it's straightfoward.
G
T25 1.9 Petrol 1985 Homebrew
-
- Trader
- Posts: 8047
- Joined: 12 Oct 2005, 20:55
- 80-90 Mem No: 1948
- Location: lincolnshire
Re: Fitting window scrapers
your talking of the J scrapers ?
mm
mm
Re: Fitting window scrapers
I guess so they do look like the letter J, The ones for the front doors.metalmick8y wrote:your talking of the J scrapers ?
mm
G
T25 1.9 Petrol 1985 Homebrew
-
- Trader
- Posts: 8047
- Joined: 12 Oct 2005, 20:55
- 80-90 Mem No: 1948
- Location: lincolnshire
Re: Fitting window scrapers
i asked cos titus said about cutting and yes the uppers are cut but not the J's
they lift out from the rear first,so lift the felt upper carefully out the way, then up and out , reverse to fit, ensure they fit under the flap from the 1/4 seal
mm
they lift out from the rear first,so lift the felt upper carefully out the way, then up and out , reverse to fit, ensure they fit under the flap from the 1/4 seal
mm
Re: Fitting window scrapers
Many thanksmetalmick8y wrote:i asked cos titus said about cutting and yes the uppers are cut but not the J's
they lift out from the rear first,so lift the felt upper carefully out the way, then up and out , reverse to fit, ensure they fit under the flap from the 1/4 seal
mm
G
T25 1.9 Petrol 1985 Homebrew