Page 12 of 24
Re: 1986 Single Cab
Posted: 03 Feb 2018, 22:52
by DoubleOSeven
https://www.dellorto.co.uk/" onclick="window.open(this.href);return false;
Sent from my Vodafone Smart ultra 6 using Tapatalk
Re: 1986 Single Cab
Posted: 04 Feb 2018, 09:44
by itchyfeet
looks like 175 plus vat on website?
Re: 1986 Single Cab
Posted: 04 Feb 2018, 10:12
by DoubleOSeven
Need gaskets, none in my stash
Re: 1986 Single Cab
Posted: 04 Feb 2018, 10:14
by DoubleOSeven
Carb needed a few extras too.
Sent from my Vodafone Smart ultra 6 using Tapatalk
Re: 1986 Single Cab
Posted: 04 Feb 2018, 10:14
by itchyfeet
I make those, never seen them for sale
Re: 1986 Single Cab
Posted: 04 Feb 2018, 10:16
by DoubleOSeven
Ah OK. I'll get the Weetabix box out
Sent from my Vodafone Smart ultra 6 using Tapatalk
Re: 1986 Single Cab
Posted: 04 Feb 2018, 11:41
by DoubleOSeven
Any ideas what these wires are for?
Sent from my Vodafone Smart ultra 6 using Tapatalk
Re: 1986 Single Cab
Posted: 04 Feb 2018, 12:05
by itchyfeet
look like oil pressure switches, yellow high pressure and blue/black is low pressure between push rod tubes.
if you have an early engine you need to permanently ground yellow
Re: 1986 Single Cab
Posted: 04 Feb 2018, 12:50
by DoubleOSeven
Carb to air manifold gaskets
Sent from my Vodafone Smart ultra 6 using Tapatalk
Re: 1986 Single Cab
Posted: 04 Feb 2018, 13:02
by itchyfeet
Going to need to cut some holes in those
Re: 1986 Single Cab
Posted: 04 Feb 2018, 13:55
by DoubleOSeven
Not long now...need some airbox to carb vacuum pipes.
Sent from my Vodafone Smart ultra 6 using Tapatalk
Re: 1986 Single Cab
Posted: 04 Feb 2018, 15:04
by DoubleOSeven
6 wires. Would the green / black go to .3 bar switch?
Sent from my Vodafone Smart ultra 6 using Tapatalk
Re: 1986 Single Cab
Posted: 04 Feb 2018, 17:34
by DoubleOSeven
Going for the Mad Max exhaust as I have no means of bending 50mm pipe
Re: 1986 Single Cab
Posted: 04 Feb 2018, 18:03
by itchyfeet
black and lilac/black ( cut wires) go to the blue thermoswitch in the thermostat housing and that switches the relay in the black box.
low pressure switch for oil is blue/black as I said
very puzzled about the green black with yellow because it looks like the oil pressure switch connector but it should be blue/black and yellow, worth checking it visually cameras sometimes get colors wrong.
what colors are the other two cut wires bottom of picture? one is brown whats the other, worth cleaning and looking closely.
itchyfeet wrote:look like oil pressure switches, yellow high pressure and blue/black is low pressure between push rod tubes.
if you have an early engine you need to permanently ground yellow
DoubleOSeven wrote:6 wires. Would the green / black go to .3 bar switch?
Sent from my Vodafone Smart ultra 6 using Tapatalk
Re: 1986 Single Cab
Posted: 04 Feb 2018, 18:42
by itchyfeet
This is what mine looks like
Black and Lilac/black go to thermo switch
red/yellow and brown temp sender ( you can barely see the colours because they are sleeved, just a tiny bit showing)
blue/black low pressure oil switch
yellow high pressure oil switch
P1090501 by
Paul_Barr, on Flickr