Not a restoration.

For documenting and technical details of T25 restorations and major repairs
[b]This section is for major restorations only.where to buy a panel or where to buy window rubbers belong in the bodywork seats and glass section.
Also please note,we need pictures of the restorations,without them posts are pretty useless.[\b]
Picture heavy and detailed threads , not for general banter or advertising
Traders welcome to post but not to advertise blatently
Threads will be cleaned of chit chat.

Moderators: User administrators, Moderators

Re: Not a restoration.

Postby bigbadbob76 » 12 May 2017, 13:31

Cheers Ant.
Yeah, big improvement on the Tesco's gloss. :D
'86 1.9 DG, 4 speed, camper.
'Q 2cv6 trike with diy EFI.
'03 Furred ranger.
'95 Suzuki bandit 750.
User avatar
bigbadbob76
 
Posts: 1504
Joined: 07 Nov 2016, 14:41
Location: Isle of Skye
80-90 Mem No: 15707

Re: Not a restoration.

Postby mshaw1980 » 26 May 2017, 12:58

Great restoration :-)

Dont suppose you replaced the panel under the sliding door rail did you?? Have got the panel from Mike on here but a bit worried about starting as it means cutting away more of the metal. Rear arch on that side is currently been cut out so there will be nothing left on that side at this rate :-)
1987 VW T25: Subaru EJ20 using RJES parts (If it was meant to go fast it wouldn't be brick shaped!)
mshaw1980
 
Posts: 326
Joined: 10 Aug 2015, 06:50
Location: Peel, Isle of Man
80-90 Mem No: 14800

Re: Not a restoration.

Postby bigbadbob76 » 26 May 2017, 13:47

Sorry I can't help there MShaw, that was one of the few lower bits that was ok so I left it be.
'86 1.9 DG, 4 speed, camper.
'Q 2cv6 trike with diy EFI.
'03 Furred ranger.
'95 Suzuki bandit 750.
User avatar
bigbadbob76
 
Posts: 1504
Joined: 07 Nov 2016, 14:41
Location: Isle of Skye
80-90 Mem No: 15707

Re: Not a restoration.

Postby bigbadbob76 » 06 Jun 2017, 21:01

I did a trial fit of my Saab 95 seats tonight. They're 3" higher than standard but it's not an issue for me so I went ahead and drilled out the spot welds on the passenger side rails using a centre bit. Then bolted in the seat with 3 M8 bolts and penny washers each side.
SWMBO is happy.

Image
Last edited by bigbadbob76 on 08 Jun 2017, 07:42, edited 2 times in total.
'86 1.9 DG, 4 speed, camper.
'Q 2cv6 trike with diy EFI.
'03 Furred ranger.
'95 Suzuki bandit 750.
User avatar
bigbadbob76
 
Posts: 1504
Joined: 07 Nov 2016, 14:41
Location: Isle of Skye
80-90 Mem No: 15707

Re: Not a restoration.

Postby Superal » 07 Jun 2017, 13:33

Van looking great now love the new colour. I have saab seats in mine big improvement so much more comfort to sit on the gf often nod off on a long drive :lol:
2.1 DJ petrol Homebrew hightop
User avatar
Superal
 
Posts: 216
Joined: 22 Mar 2013, 07:49
Location: Northampton
80-90 Mem No: 12142

Re: Not a restoration.

Postby bigbadbob76 » 08 Jun 2017, 07:41

Thanks Al.
I got the drivers seat in last night in spite of being bitten by a horde of these...

Image


Image
Last edited by bigbadbob76 on 08 Jul 2017, 17:57, edited 1 time in total.
'86 1.9 DG, 4 speed, camper.
'Q 2cv6 trike with diy EFI.
'03 Furred ranger.
'95 Suzuki bandit 750.
User avatar
bigbadbob76
 
Posts: 1504
Joined: 07 Nov 2016, 14:41
Location: Isle of Skye
80-90 Mem No: 15707

Re: Not a restoration.

Postby captain Byrne » 08 Jun 2017, 08:47

bigbadbob76 wrote:Thanks Al.
I got the drivers seat in last night in spite of being bitten by a horde of these...

Image

Yikes. Going to Ardnamurchan peninsula in a couple of weeks & praying for a breeze to keep the buggers away.
1983 LHD Westfalia poptop 1.9 DG petrol.
User avatar
captain Byrne
 
Posts: 923
Joined: 19 Mar 2009, 10:01
Location: York
80-90 Mem No: 7107

Re: Not a restoration.

Postby bigbadbob76 » 08 Jun 2017, 09:39

Good luck Capt'n.
Ardnamurchan is pretty exposed so if you're going to get a breeze anywhere you'll get it there.
Enjoy!!
'86 1.9 DG, 4 speed, camper.
'Q 2cv6 trike with diy EFI.
'03 Furred ranger.
'95 Suzuki bandit 750.
User avatar
bigbadbob76
 
Posts: 1504
Joined: 07 Nov 2016, 14:41
Location: Isle of Skye
80-90 Mem No: 15707

Re: Not a restoration.

Postby bigbadbob76 » 03 Jul 2017, 20:33

I've had some scraping noises from my back brakes lately so whipped the drums off and had a look in there.
Amazed to find the shoes had plenty of material left and the springs, adjusters, retainers etc and even the back plate were in almost new condition and even the drums didn't have a big lip.
Just a bit of rust around the outside that was scraping on the back plate.
One of the bearings looked pretty dry though and hub looked like it had been hot where it sits in the seal, so i worked in some grease as best i could, no point fitting the Meyle bearings i have on the shelf so I put it all back together. :roll:
'86 1.9 DG, 4 speed, camper.
'Q 2cv6 trike with diy EFI.
'03 Furred ranger.
'95 Suzuki bandit 750.
User avatar
bigbadbob76
 
Posts: 1504
Joined: 07 Nov 2016, 14:41
Location: Isle of Skye
80-90 Mem No: 15707

Re: Not a restoration.

Postby bigbadbob76 » 15 Oct 2017, 17:15

I picked up this roof box for a mere £70 on Saturday and got the Thule bars for free today. It should free up some space in the van.

Image
'86 1.9 DG, 4 speed, camper.
'Q 2cv6 trike with diy EFI.
'03 Furred ranger.
'95 Suzuki bandit 750.
User avatar
bigbadbob76
 
Posts: 1504
Joined: 07 Nov 2016, 14:41
Location: Isle of Skye
80-90 Mem No: 15707

Re: Not a restoration.

Postby mshaw1980 » 16 Oct 2017, 19:37

Saab seats look like a good option and cheap but worried about the extra height. I am 6'1 and have rugby thighs from years of weight training so worry about increasing seat height as the steering wheel isn't adjustable. How do you find them?

:rofl
1987 VW T25: Subaru EJ20 using RJES parts (If it was meant to go fast it wouldn't be brick shaped!)
mshaw1980
 
Posts: 326
Joined: 10 Aug 2015, 06:50
Location: Peel, Isle of Man
80-90 Mem No: 14800

Re: Not a restoration.

Postby bigbadbob76 » 17 Oct 2017, 07:33

The extra height is not a problem for me Mark, but I'm 5ft10 with skinny thighs.
That's with them set as low as they'll go.
I think they'd be a problem for you though by the sound of it. :(
'86 1.9 DG, 4 speed, camper.
'Q 2cv6 trike with diy EFI.
'03 Furred ranger.
'95 Suzuki bandit 750.
User avatar
bigbadbob76
 
Posts: 1504
Joined: 07 Nov 2016, 14:41
Location: Isle of Skye
80-90 Mem No: 15707

Re: Not a restoration.

Postby mshaw1980 » 17 Oct 2017, 18:50

Doh! Have to have a rethink then. Cheers mate :ok
1987 VW T25: Subaru EJ20 using RJES parts (If it was meant to go fast it wouldn't be brick shaped!)
mshaw1980
 
Posts: 326
Joined: 10 Aug 2015, 06:50
Location: Peel, Isle of Man
80-90 Mem No: 14800

Re: Not a restoration.

Postby bigbadbob76 » 18 Oct 2017, 12:26

You could use saab seats and then an aftermarket steering wheel on an extended boss but you'd be close to the roof and looking out of the top of the windscreen.
If I was as tall as you and as muscular in the thighs I'd be avoiding saab seats.
'86 1.9 DG, 4 speed, camper.
'Q 2cv6 trike with diy EFI.
'03 Furred ranger.
'95 Suzuki bandit 750.
User avatar
bigbadbob76
 
Posts: 1504
Joined: 07 Nov 2016, 14:41
Location: Isle of Skye
80-90 Mem No: 15707

Re: Not a restoration.

Postby mshaw1980 » 18 Oct 2017, 21:04

When I drive vehicles that are high off the ground like our scenic (well higher up compared to my 159) I like to have the seat as low as it can go. When I get in my wife's car after she has been driving my head is nearly touching the roof and steering wheel in my chest...she is only 5'1 though. :rollin

Same principle though. I wouldnt like sitting in a position where my eyes are the same level as the rear view mirror. Will have to do some more research.

Getting ahead of myself though. Gotta do all the rust repairs on the driver side of my van now all the passenger side is done. Another 6 months to be done...hopefully.
1987 VW T25: Subaru EJ20 using RJES parts (If it was meant to go fast it wouldn't be brick shaped!)
mshaw1980
 
Posts: 326
Joined: 10 Aug 2015, 06:50
Location: Peel, Isle of Man
80-90 Mem No: 14800

PreviousNext

Return to Restoration and Major Repairs

Who is online

Users browsing this forum: No registered users and 3 guests