Hi,
I've desperately been looking to get some replacement parts for the roof bed as some are missing. I've checked Gunzl site but not found any. I think they are called runner wheels. It's what the board for the top bed uses to run along.
https://picasaweb.google.com/jane.herse ... directlink
I've been to endless hardware stores to try and get something like this but no luck!
Anyone know where I could get something like this?
Cheers
roof bed runner wheels
Moderators: User administrators, Moderators
roof bed runner wheels
1998 Westfalia Club Joker, 1.6l TD
- ..lee..
- Registered user
- Posts: 733
- Joined: 04 Jun 2006, 22:13
- 80-90 Mem No: 4478
- Location: llanelli, s wales
Re: roof bed runner wheels
i know what your after. dish washers use a similar wheel for the runners. well the bosch one do anyway.
google bosch dishwasher parts see if that suits.
google bosch dishwasher parts see if that suits.
it`s a big round cage and there`s too many animals in it for my liking. To help address this ring lee on 07977 765818.
- Hacksawbob
- Registered user
- Posts: 4443
- Joined: 11 Oct 2005, 07:11
- 80-90 Mem No: 1168
- Location: Lancs UK member 1168
Re: roof bed runner wheels
I would fabricate your own
http://www.metals4u.co.uk/detail.asp?ca ... prd_id=448" onclick="window.open(this.href);return false;
drill it out job done, the Westy bed runners aren't critical for load bearing as the bed rests on the metal shelf when in use, so jsut get them close. if you had a mate with a lathe it would be better to get the centre drilled accuratley, and maybe chamfer the edge but I am sure you could do an adequate job the a vice, a drill and a bit of sand paper.
http://www.metals4u.co.uk/detail.asp?ca ... prd_id=448" onclick="window.open(this.href);return false;
drill it out job done, the Westy bed runners aren't critical for load bearing as the bed rests on the metal shelf when in use, so jsut get them close. if you had a mate with a lathe it would be better to get the centre drilled accuratley, and maybe chamfer the edge but I am sure you could do an adequate job the a vice, a drill and a bit of sand paper.
member 1168
Re: roof bed runner wheels
Thanks! Useful tips. I think I will make
my own, it looks fairly easy with those nylon rods.
Cheers
my own, it looks fairly easy with those nylon rods.
Cheers
1998 Westfalia Club Joker, 1.6l TD
Re: roof bed runner wheels
They look like small skateboard wheels!