Need help to identify part/s

Post it here, if it doesn't fit any of the above.

Moderators: User administrators, Moderators

Post Reply
Starky
Registered user
Posts: 21
Joined: 14 Mar 2011, 18:29
80-90 Mem No: 9377

Need help to identify part/s

Post by Starky »

This is probably a silly newbie question with an obvious answer but...

...whilst doing some work in the bus I noticed a fluid container under the front wheel arch that had it's connecting pipes hanging off. There is also one on the other side (also with fittings hanging off). Both containers look empty. I could not find where the pipes went to and can't find in the Haynes manual.

Image

Image

The bus is an '84 1.9 WBX

User avatar
Aidan
Trader
Posts: 6557
Joined: 11 Oct 2005, 19:21
80-90 Mem No: 742
Location: Llanfyllin, mid Wales : )
Contact:

Re: Need help to identify part/s

Post by Aidan »

fuel tank breather balance/vapour tanks check out the fuel section in Haynes should be in there, don't fill her full till you've sorted

Starky
Registered user
Posts: 21
Joined: 14 Mar 2011, 18:29
80-90 Mem No: 9377

Re: Need help to identify part/s

Post by Starky »

Many thanks Aldan, located them in the manual now. :ok

Post Reply