Cab noise....

Post it here, if it doesn't fit any of the above.

Moderators: User administrators, Moderators

Post Reply
User avatar
itchyfeet
Registered user
Posts: 12427
Joined: 23 Jul 2007, 17:24
80-90 Mem No: 12733
Location: South Hampshire

Cab noise....

Post by itchyfeet »

Empty tin top, should I be worried?

ImageTintop Noise 70 by Paul_Barr, on Flickr

ImageTintop Noise 60 by Paul_Barr, on Flickr

measure pop top next...
1988 DG WBX LPG Tin Top
1989 DJ digijet WBX Holdsworth Villa 3 Pop Top
itchylinks

petethefeet
Registered user
Posts: 487
Joined: 03 Oct 2012, 19:24
80-90 Mem No: 12639
Location: South Bucks

Re: Cab noise....

Post by petethefeet »

We have an 1982 with very little sound insulation and deadening, just the rubber mats and standard door cards. Recently I have added some Dodo mat to the cab floor, inside the cab doors, inside the sliding door, behind the fridge and inside the boot lid.
It has stopped the ringing when you shut the doors and it has reduced the noise levels in the cab and all for about £40 and a few hours of work. Would be good to do the rest at some stage.
But going back to your initial question, yes you probably are damaging your hearing at those noise levels for prolonged periods of time. I am guessing the pop top will be quieter due to the soft lining of the roof.
1982 2 litre CU Auto Devon Moonraker called Brian

User avatar
itchyfeet
Registered user
Posts: 12427
Joined: 23 Jul 2007, 17:24
80-90 Mem No: 12733
Location: South Hampshire

Re: Cab noise....

Post by itchyfeet »

it was sitting on the dash I guess to be fair I should be measuring at head level incase there is a difference.
1988 DG WBX LPG Tin Top
1989 DJ digijet WBX Holdsworth Villa 3 Pop Top
itchylinks

multisi
Registered user
Posts: 1725
Joined: 03 Apr 2016, 12:01
80-90 Mem No: 12
Location: jersey

Re: Cab noise....

Post by multisi »

Perhaps your tin top doesn't have the thick wadding type insulation stuck to the underside of the roof like the caravelle models have. Carpet with underlay would help aswell, The new factory look heat pressed carpets come with underlay for the cab floor and walk through.
1992 red lle 2.2 subaru 1990 rhd caravelle 2.2 subaru 1986 california import vanagon

User avatar
itchyfeet
Registered user
Posts: 12427
Joined: 23 Jul 2007, 17:24
80-90 Mem No: 12733
Location: South Hampshire

Re: Cab noise....

Post by itchyfeet »

multisi wrote:Perhaps your tin top doesn't have the thick wadding type insulation stuck to the underside of the roof like the caravelle models have. Carpet with underlay would help aswell, The new factory look heat pressed carpets come with underlay for the cab floor and walk through.


no definately not, it has been lined with 3mm ply and a carpet covering. It was quieter when I used it as a camper with all the furniture, fridge and beddding but still not as quiet and the pop top
1988 DG WBX LPG Tin Top
1989 DJ digijet WBX Holdsworth Villa 3 Pop Top
itchylinks

User avatar
937carrera
Registered user
Posts: 3599
Joined: 05 Apr 2015, 19:29
80-90 Mem No: 16333
Location: N Yorks.

Re: Cab noise....

Post by 937carrera »

I guess there are three sources

Tyre noise
Wind noise
Engine noise

You could dip the clutch and see what the levels drop by to get the engine component.

or turn the radio down.

I'll get me coat :roll:
1981 RHD 2.0 Aircooled Leisuredrive project, CU engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine

User avatar
itchyfeet
Registered user
Posts: 12427
Joined: 23 Jul 2007, 17:24
80-90 Mem No: 12733
Location: South Hampshire

Re: Cab noise....

Post by itchyfeet »

To be fair it was a windy day

I will run some more tests including the car
1988 DG WBX LPG Tin Top
1989 DJ digijet WBX Holdsworth Villa 3 Pop Top
itchylinks

adie89
Registered user
Posts: 293
Joined: 04 Sep 2012, 21:25
80-90 Mem No: 11532
Location: Wiltshire

Re: Cab noise....

Post by adie89 »

I got a massive reduction in noise with dynamat type material. Even patches on each panel reduce the ‘sat inside a rattling metal biscuit tin effect’. Naturally completely covering panels on the inside makes a much bigger difference.
insulation behind door cards will further reduce noise. I’ve also read a thread where someone used roof flashings in the rear air ducts to cut induction noise.
In the Bentley book it says VW used under seal in wheel arches to deaden noise as well as rust protection, so maybe it’s worth an extra layer in the wheel arches?

Funnily though, HSE says ear protection is needed at work over 85dB, 3M recommend above 83 to at least use foam type plugs :lol: noisy beasts.
Greta: 85’ LHD 2.5L Subaru 14in Syncro
http://forum.club8090.co.uk/viewtopic.php?t=165773

silverbullet
Trader
Posts: 16311
Joined: 08 Jun 2009, 09:51
80-90 Mem No: 6908
Location: Surrey Syncronaut #156
Contact:

Re: Cab noise....

Post by silverbullet »

Fit wheel arch liners, definitely quieter ime

Sent from my S60 using Tapatalk

silverbullet
Trader
Posts: 16311
Joined: 08 Jun 2009, 09:51
80-90 Mem No: 6908
Location: Surrey Syncronaut #156
Contact:

Re: Cab noise....

Post by silverbullet »

https://www.noisehelp.com/noise-level-chart.html" onclick="window.open(this.href);return false;

Sent from my S60 using Tapatalk

User avatar
itchyfeet
Registered user
Posts: 12427
Joined: 23 Jul 2007, 17:24
80-90 Mem No: 12733
Location: South Hampshire

Re: Cab noise....

Post by itchyfeet »

Today I checked the tin top again at 60mph =80dbA and 70mph =82dbA held by my head and not on the dash (on dash adds at least 3dbA)

I noticed in my car that road surface made up to 4-5dbA difference, this road was quite rough, concrete was the worst, rough tarmac almost as bad as concrete

I have added some rugs to the engine lid area as sound proofing and refitted one cab step mat, it also was not so windy today as my first measurement which I think adds a lot.

Next to try more soundproofing, the piece on the angled engine bulkhead is missing, need to find a replacement.

I'm planning a rock n roll bed/seat so that should help.
1988 DG WBX LPG Tin Top
1989 DJ digijet WBX Holdsworth Villa 3 Pop Top
itchylinks

what2do
Registered user
Posts: 2824
Joined: 05 Oct 2012, 08:55
80-90 Mem No: 11974
Location: Salisbury

Re: Cab noise....

Post by what2do »

Solve all your worries by fitting a full bulkhead!!!!
Why would the glass be anything other than half full?

'89 panel van, 1.9 DG.

User avatar
itchyfeet
Registered user
Posts: 12427
Joined: 23 Jul 2007, 17:24
80-90 Mem No: 12733
Location: South Hampshire

Re: Cab noise....

Post by itchyfeet »

what2do wrote:Solve all your worries by fitting a full bulkhead!!!!

Yours is only quiet becuse it's not moved in ages :rofl
1988 DG WBX LPG Tin Top
1989 DJ digijet WBX Holdsworth Villa 3 Pop Top
itchylinks

Post Reply