Hi Guys,
Firstly please don't worry, I will have all this checked over so no need for the usual "leave it to someone who knows what they are doing".
I have recently installed an underslung LPG Gas It system that feeds into this 8mm Manifold:
I want to keep my old Autosleeper copper pipes that feed into the fridge and cooking hob however it is not 6mm as I thought but 1/4 inch Imperial.
I would like to have this connected to my manifold safely. At first I assumed I could buy a 8mm x 1/4" straight coupling but seems I cannot find any items like this.
Questions
1) What is the defacto best / safest way to connect my old 1/4" pipes to my 8mm Manifold?
2) Can I use a 1/4" compression nut and 1/4" olive with the gas taps I have, or are they only designed for 8mm pipe? i.e. are the taps designed for a range of pipe sizes with the compression nuts varying accordingly or are they designed only for specific sized pipes, regardless of nut and olive used?
3) When I originally thought the old system was 6mm I bought a 8mm x 6mm reducing olive set:
However my 1/4" pipe would not fit this. Is it considered a 'bodge' / unsafe to evenly sand 0.3mm of copper off the pipe to make this fit?
Thanks for any advice
Autosleeper 1/4" Gas System into 8mm Manifold
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 428
- Joined: 29 Apr 2009, 17:11
- 80-90 Mem No: 9396
- Location: Bournemouth
Autosleeper 1/4" Gas System into 8mm Manifold
1983 Autosleeper Trooper - 1.8 Gti Conversion
- marlinowner
- Registered user
- Posts: 1530
- Joined: 28 Jan 2014, 12:02
- 80-90 Mem No: 13646
- Location: Scottish Borders
Re: Autosleeper 1/4
https://rover.ebay.com/rover/0/0/0?mpre ... 1695081490" onclick="window.open(this.href);return false;
Use with a short length of 8mm.
8mm is close to 5/16, use an 8mm olive in the reducer.
Use with a short length of 8mm.
8mm is close to 5/16, use an 8mm olive in the reducer.
1993 SA VW T25/T3 2.5i Microbus/homebrew camper
1981/1968 Marlin Kitcar TR6 Engine
1981/1968 Marlin Kitcar TR6 Engine
-
- Registered user
- Posts: 428
- Joined: 29 Apr 2009, 17:11
- 80-90 Mem No: 9396
- Location: Bournemouth
Re: Autosleeper 1/4
marlinowner wrote:https://rover.ebay.com/rover/0/0/0?mpre ... 1695081490
Use with a short length of 8mm.
8mm is close to 5/16, use an 8mm olive in the reducer.
Perfect, didnt think of that.
So Gas Manifold - 8mm pipe - Reducing compression (5/16+8mm olive - 1/4) - 1/4" Pipe ?
1983 Autosleeper Trooper - 1.8 Gti Conversion
- marlinowner
- Registered user
- Posts: 1530
- Joined: 28 Jan 2014, 12:02
- 80-90 Mem No: 13646
- Location: Scottish Borders
Re: Autosleeper 1/4
Exactly.
1993 SA VW T25/T3 2.5i Microbus/homebrew camper
1981/1968 Marlin Kitcar TR6 Engine
1981/1968 Marlin Kitcar TR6 Engine