Hybrid ceramic bearings
Moderators: User administrators, Moderators
- Oldiebut goodie
- Registered user
- Posts: 7294
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Hybrid ceramic bearings
Has anyone used them, any good points/bad points/experiences?
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
-
- Registered user
- Posts: 1809
- Joined: 10 May 2013, 11:59
- 80-90 Mem No: 13706
- Location: Central Scotland
Re: Hybrid ceramic bearings
They are a growing thing amongst racing cyclists these days, used for low friction. So bike websites might be a good place to look. Can't help myself, my best bike is from 1984, older than the van! Quality steel throughout!
So if you know any bike nuts? Trouble is, those who have shelled out are going to be positively biased, perhaps not wanting to acknowledge if they were a waste of money. Also most bike nuts will get a higher performance boost by losing weight, and aren't trained to a high enough level to notice the performance benefits to fancy bearings.
Hope that's done help, hate to see a post with no replies!
So if you know any bike nuts? Trouble is, those who have shelled out are going to be positively biased, perhaps not wanting to acknowledge if they were a waste of money. Also most bike nuts will get a higher performance boost by losing weight, and aren't trained to a high enough level to notice the performance benefits to fancy bearings.
Hope that's done help, hate to see a post with no replies!
Have you ever seen an unhappy fool?
88 Transporter with hitop camper conversion, 1.6td.
88 Transporter with hitop camper conversion, 1.6td.
- Oldiebut goodie
- Registered user
- Posts: 7294
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Re: Hybrid ceramic bearings
Yes - they appear to be the in thing with skateboards as well. Their price appears to be along the lines of decent high end steel ones. It was just that I was going to try them on the Webasto fan motors in an effort to reduce noise from normal steel replacements. The first couple that I have tried have been only a slight improvement.
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶