anti roll bar d bush gap
Posted: 17 Nov 2017, 19:02
Just replaced ARB d-bush. The old ones had a gap that was filled with a piece of rubber obviously made to complement the D-bush. The new ones have a gap but no extra piece to fill the gap.
Should I insert the old gap fillers or take it for it's MOT with the gap? I did the drop-link bushes at the same time.
Any help appreciated, to save me from a 12 mile unnecessary drive.
I'm sure I got the right bushes for the year, but wonder if the anti roll bar is original. I'm going to measure the diameter again (with verniers), now the old bushes are off and I've only fitted one new one so far. Perhaps the parts people sent me the wrong year!
ARB Measured as 21mm.
Many thanks
Should I insert the old gap fillers or take it for it's MOT with the gap? I did the drop-link bushes at the same time.
Any help appreciated, to save me from a 12 mile unnecessary drive.
I'm sure I got the right bushes for the year, but wonder if the anti roll bar is original. I'm going to measure the diameter again (with verniers), now the old bushes are off and I've only fitted one new one so far. Perhaps the parts people sent me the wrong year!
ARB Measured as 21mm.
Many thanks