Hi,
I've just bought some 16" ET37 merc alloys with 205 tyres as I believe they fit on with no spacers required
Is this true or not and do I need longer studs/nuts ?
Mercedes 16" alloys
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 105
- Joined: 25 Nov 2009, 17:53
- 80-90 Mem No: 0
- Location: (Not so) Sunny Dorset
- kevtherev
- Registered user
- Posts: 18830
- Joined: 23 Oct 2005, 20:13
- 80-90 Mem No: 2264
- Location: Country estate Wolverhampton Actually
Re: Mercedes 16" alloys
You will need longer studs and the merc nuts, if you are going from steel to alloy.
The tyres will be too small.
You'll need 215/60x16 load rating >95
The tyres will be too small.
You'll need 215/60x16 load rating >95
AGG 2.0L 8V. (Golf GTi MkIII)
Re: Mercedes 16" alloys
And I think Merc alloys only have 12mm holes for the studs and you need 14mm.
1y Tin top rust collector.
- kevtherev
- Registered user
- Posts: 18830
- Joined: 23 Oct 2005, 20:13
- 80-90 Mem No: 2264
- Location: Country estate Wolverhampton Actually
Re: Mercedes 16" alloys
Benz ML 16" are 14mm and the centre bore is 67mm
Only the rears need a 5mm spacer to avoid fouling the swingarm, but I used 10mm ones all round
Only the rears need a 5mm spacer to avoid fouling the swingarm, but I used 10mm ones all round
AGG 2.0L 8V. (Golf GTi MkIII)