Carat alloy wheel nuts help
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 66
- Joined: 23 May 2016, 21:00
- 80-90 Mem No: 0
Carat alloy wheel nuts help
Just fitted a set of carat alloys which came with all the original wheel bolts/nuts fronts were fine the rears fit but after tightening them up there is still a lot of thread on the nuts that is not being used see picture.
Is this ok/safe or do I need to change anything?
Is this ok/safe or do I need to change anything?
- Titus A Duxass
- Registered user
- Posts: 5778
- Joined: 24 Nov 2007, 08:22
- 80-90 Mem No: 4475
- Location: Cologne
Re: Carat alloy wheel nuts help
Nope that is not safe.
You may have the incorrect nuts, what face do they have (radius or cone)?
Steel wheel nuts have radius and the carats have cone.
Those nuts do not look like they have 7 turns engaged.
Have you got the wheels sat on the hubs correctly, make sure that they are not sat on the two small bolt heads.
You may have the incorrect nuts, what face do they have (radius or cone)?
Steel wheel nuts have radius and the carats have cone.
Those nuts do not look like they have 7 turns engaged.
Have you got the wheels sat on the hubs correctly, make sure that they are not sat on the two small bolt heads.
VW T3 GTi Camper 2,0l
- marlinowner
- Registered user
- Posts: 1530
- Joined: 28 Jan 2014, 12:02
- 80-90 Mem No: 13646
- Location: Scottish Borders
Re: Carat alloy wheel nuts help
My van has atiwe alloys and nuts/bolts fitted by vw from new, an alarming length of thread is unused on the nuts, but that's what vw did - they've been fine for 20 odd years and torque up properly. As above check they are tapered nuts/bolts and you can get 7 or more turns on them. If in doubt get a extended stud conversion kit from Brickwerks.
1993 SA VW T25/T3 2.5i Microbus/homebrew camper
1981/1968 Marlin Kitcar TR6 Engine
1981/1968 Marlin Kitcar TR6 Engine
-
- Registered user
- Posts: 66
- Joined: 23 May 2016, 21:00
- 80-90 Mem No: 0
Re: Carat alloy wheel nuts help
Titus A Duxass wrote:Nope that is not safe.
You may have the incorrect nuts, what face do they have (radius or cone)?
Steel wheel nuts have radius and the carats have cone.
Those nuts do not look like they have 7 turns engaged.
Have you got the wheels sat on the hubs correctly, make sure that they are not sat on the two small bolt heads.
Below is a picture of the wheel with the nut removed and one of the actual nut which I believe is genuine?
I get 8 turns when I tighten the wheel up but there is still thread on the nut that is not being used any help or advice would be much appreciated.
Thanks
- marlinowner
- Registered user
- Posts: 1530
- Joined: 28 Jan 2014, 12:02
- 80-90 Mem No: 13646
- Location: Scottish Borders
Re: Carat alloy wheel nuts help
It's all as VW intended, the nuts originally had caps on so you couldn't see the exposed thread and be alarmed.
1993 SA VW T25/T3 2.5i Microbus/homebrew camper
1981/1968 Marlin Kitcar TR6 Engine
1981/1968 Marlin Kitcar TR6 Engine
- Titus A Duxass
- Registered user
- Posts: 5778
- Joined: 24 Nov 2007, 08:22
- 80-90 Mem No: 4475
- Location: Cologne
Re: Carat alloy wheel nuts help
If you're getting 8 turns then it's safe.
As above, ignore the rest.
As above, ignore the rest.
VW T3 GTi Camper 2,0l
-
- Registered user
- Posts: 66
- Joined: 23 May 2016, 21:00
- 80-90 Mem No: 0
Re: Carat alloy wheel nuts help
thanks for all the help does anyone know if you can still get the silver caps that go on the end?
Re: Carat alloy wheel nuts help
Got black ones on mine.Never come across silver ones.
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
"The difference between genius and stupidity is that genius has its limits"
- marlinowner
- Registered user
- Posts: 1530
- Joined: 28 Jan 2014, 12:02
- 80-90 Mem No: 13646
- Location: Scottish Borders
Re: Carat alloy wheel nuts help
Here's a picture of the nuts on my Atiwe wheels, one is missing the cap - the stud is down in the shadow somewhere...
1993 SA VW T25/T3 2.5i Microbus/homebrew camper
1981/1968 Marlin Kitcar TR6 Engine
1981/1968 Marlin Kitcar TR6 Engine
Re: Carat alloy wheel nuts help
Brickwerks have started selling nice repro stock wheel nuts
1989 2.1 MV Auto
Re: Carat alloy wheel nuts help
If you're van originally had steel wheels you will need longer wheel studs that need to be pressed in the rear hubs, also the front wheel bolts need to be longer. There is a fitting guide on brickworks web site that is very helpful and they sell all the gear.
- marlinowner
- Registered user
- Posts: 1530
- Joined: 28 Jan 2014, 12:02
- 80-90 Mem No: 13646
- Location: Scottish Borders
Re: Carat alloy wheel nuts help
Factory fitted alloys came with the same studs as standard steels. Nuts and bolts have tapered seats.
1993 SA VW T25/T3 2.5i Microbus/homebrew camper
1981/1968 Marlin Kitcar TR6 Engine
1981/1968 Marlin Kitcar TR6 Engine
- kevtherev
- Registered user
- Posts: 18830
- Joined: 23 Oct 2005, 20:13
- 80-90 Mem No: 2264
- Location: Country estate Wolverhampton Actually
Re: Carat alloy wheel nuts help
Yes although it's all fine, it sure does look alarming when you see it.
I think VW should have given this a little more thought.
I think VW should have given this a little more thought.
AGG 2.0L 8V. (Golf GTi MkIII)
-
- Registered user
- Posts: 66
- Joined: 23 May 2016, 21:00
- 80-90 Mem No: 0
- marlinowner
- Registered user
- Posts: 1530
- Joined: 28 Jan 2014, 12:02
- 80-90 Mem No: 13646
- Location: Scottish Borders
Re: Carat alloy wheel nuts help
The VAG part number for the complete nut is 255 601 143, discontinued in 2009(?), it seems unlikely that the caps are available - best bet would be to replace the nuts with the ones sold by brickwerks:
https://www.brickwerks.co.uk/wheel-nut- ... nless.html" onclick="window.open(this.href);return false;
https://www.brickwerks.co.uk/wheel-nut- ... nless.html" onclick="window.open(this.href);return false;
1993 SA VW T25/T3 2.5i Microbus/homebrew camper
1981/1968 Marlin Kitcar TR6 Engine
1981/1968 Marlin Kitcar TR6 Engine