Page 1 of 1
Hubcentric spacers?
Posted: 03 May 2016, 21:03
by kit
If I were to fit the 20mm Hubcentric spacers on the rear to save me pressing out the studs etc, could I then fit wheels that were ET30 on or would that not work? I have been through Wiki but still can't find the answer, cheers.
Hubcentric spacers?
Posted: 03 May 2016, 22:10
by clift_d
What width of rim are you planning to use? ET30 is not far off standard but that's with a 5-6 inch rim, so presumably you're thinking of wide wheels which may then cause you issues with your sliding door catching.
Also I believe the standard fitting on these vans is bolt centric not hub centric so I'm not clear what kind of spacer you mean.
Re: Hubcentric spacers?
Posted: 03 May 2016, 22:58
by kit
The rears are 8 inch so it looks like a back to the drawing board
Re: Hubcentric spacers?
Posted: 03 May 2016, 23:00
by kit
The rears are 8 inch so it looks like a back to the drawing board
http://pages.ebay.com/link/?nav=item.vi ... ID=EBAY-GB" onclick="window.open(this.href);return false;
Re: Hubcentric spacers?
Posted: 04 May 2016, 01:02
by clift_d
Spacers might work just not sure about the sliding door thing.
Best bet is to post details of the wheels you're looking at. Chances are someone here has tried to fit them before and knows the pitfalls.