Hi looking for some advice please
Can I fit a set of alloy wheels that have fitment for a T4 to a T25
Heres the spec on the wheels
Material Alloy
Rim Diameter 17 inch
Rim Width 8J
Offset 35
Stud Diameter 112
Number of Studs 5
Would adapters etc be required
I would appreciate any advice,
but please, Im not a techie, so explanations in plain English please ............. as I wouldnt want to ask a further 50 questions on what the answers mean
Many thanks
T4 wheel Fitment to T25
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 29
- Joined: 10 Oct 2014, 02:50
- 80-90 Mem No: 0
Re: T4 wheel Fitment to T25
You'll most likely need a 5mm spacer at the front to clear the suspension on full lock, and you may want a 10mm spacer (and therefore longer studs) at the back to even things out visually.
Anything significantly more than this and you start affecting geometry...
Anything significantly more than this and you start affecting geometry...
- Synkraut
- Registered user
- Posts: 179
- Joined: 12 Feb 2011, 18:41
- 80-90 Mem No: 9894
- Location: Lueneburg, Germany
Re: T4 wheel Fitment to T25
Center bore for T4 was 57,1mm, the T25 requires 66,5mm
Cheers, André
'89 T3 GL syncro, 2.1 MV
'91 T3 doka syncro, 2.2 Subaru
http://www.feine-tapeten.de" onclick="window.open(this.href);return false;
'89 T3 GL syncro, 2.1 MV
'91 T3 doka syncro, 2.2 Subaru
http://www.feine-tapeten.de" onclick="window.open(this.href);return false;
Re: T4 wheel Fitment to T25
That's a lot of metal to remove.
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
"The difference between genius and stupidity is that genius has its limits"
-
- Trader
- Posts: 16349
- Joined: 08 Jun 2009, 09:51
- 80-90 Mem No: 6908
- Location: Surrey Syncronaut #156
- Contact:
Re: T4 wheel Fitment to T25
I have bored out a few wheels. If any come in that look like they will be sketchy after machining I refuse to do them.
Pics of the hub side of the wheel centre with a tape measure in shot might help here.
Pics of the hub side of the wheel centre with a tape measure in shot might help here.