23.5mm ID waste water pipe joiners

The Tardis factor (interiors, awnings, roofs etc)

Moderators: User administrators, Moderators

Post Reply
User avatar
itchyfeet
Registered user
Posts: 12427
Joined: 23 Jul 2007, 17:24
80-90 Mem No: 12733
Location: South Hampshire

23.5mm ID waste water pipe joiners

Post by itchyfeet »

Anybody know how I join 23.5mm ID convoluted waste water pipe ?

It's what I have on the van, it exits underneath.
Nobody in UK seems to care but when I go to France I don't see anybody doing that, they all seem to catch it in a tank or maybe just let it run out of sight.
I was going to do the latter but need to extend the pipe but I can't find joiners?

Perhaps I'm missing something , I can find sealing sleeves do these fit onto 20mm pipe perhaps? If not what do they seal onto?

thanks in advance
1988 DG WBX LPG Tin Top
1989 DJ digijet WBX Holdsworth Villa 3 Pop Top
itchylinks

weimarbus
Registered user
Posts: 808
Joined: 19 Jun 2010, 12:53
80-90 Mem No: 10165
Location: coulsdon

Re: 23.5mm ID waste water pipe joiners

Post by weimarbus »

As a shed owner as well, the waste pipe usually has connectors that fit on the OD as it exits the van (check eb--y), a bucket works well on the camper, catching errant dribbles, but if it is sunny and warm then evaporation should take care of most washing up discharge.
1985 hi-top 2.1MV with DG carb and LPG
1955 trials buggy with 1.9 DG high lift cam and twin dell's (now sold)
1972 1303 beetle
1992 Audi 100 2.8 quattro estate
1967 Vw  Madison kit

User avatar
itchyfeet
Registered user
Posts: 12427
Joined: 23 Jul 2007, 17:24
80-90 Mem No: 12733
Location: South Hampshire

Re: 23.5mm ID waste water pipe joiners

Post by itchyfeet »

thanks looks like sealing sleeves then 3/4 inch pipe connectors

https://www.caravanaccessoryshop.co.uk/ ... -4inch/850" onclick="window.open(this.href);return false;
1988 DG WBX LPG Tin Top
1989 DJ digijet WBX Holdsworth Villa 3 Pop Top
itchylinks

Post Reply