Hello
I want to make interior plywood panels using blind fittings rather than having screws or panel clips on show. Any bright ideas how to do this? Does anyone have any template measurements? Fanx
Interior panel templates for the rear
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 588
- Joined: 10 Aug 2015, 06:50
- 80-90 Mem No: 14800
- Location: Peel, Isle of Man
Interior panel templates for the rear
1987 VW T25: Subaru EJ20 using RJES parts (If it was meant to go fast it wouldn't be brick shaped!)
- 937carrera
- Registered user
- Posts: 3599
- Joined: 05 Apr 2015, 19:29
- 80-90 Mem No: 16333
- Location: N Yorks.
Re: Interior panel templates for the rear
You can have clean fronts by using L plates or wooden/plastic blocks and screws on the inside of the panels.
What type of interior do you want to make. My Leisuredrive interior is out of the van while the bodywork is underway so I can take measurements if that would help.
Main section
External where you can just about see wardrobe
Thanks for making me look at the van as I bought it before I started the restore
What type of interior do you want to make. My Leisuredrive interior is out of the van while the bodywork is underway so I can take measurements if that would help.
Main section
External where you can just about see wardrobe
Thanks for making me look at the van as I bought it before I started the restore
1981 RHD 2.0 Aircooled Leisuredrive project, CU engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
-
- Registered user
- Posts: 1810
- Joined: 10 May 2013, 11:59
- 80-90 Mem No: 13706
- Location: Central Scotland
Re: Interior panel templates for the rear
I’ve used super sticky self adhesive hook-and-loop tape relatives successfully on the flat panel below the rear windows on the passenger side. The sliding door panel - it curves so I had to use screws
Have you ever seen an unhappy fool?
88 Transporter with hitop camper conversion, 1.6td.
88 Transporter with hitop camper conversion, 1.6td.
- 937carrera
- Registered user
- Posts: 3599
- Joined: 05 Apr 2015, 19:29
- 80-90 Mem No: 16333
- Location: N Yorks.
Re: Interior panel templates for the rear
Ah, looks like I may have misunderstood the question.
1981 RHD 2.0 Aircooled Leisuredrive project, CU engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
-
- Registered user
- Posts: 671
- Joined: 01 Feb 2010, 10:23
- 80-90 Mem No: 7803
- Location: birmingham
Re: Interior panel templates for the rear
I used fir tree clips bought from eBay,I ground the heads pretty flat so wouldn't leave a bulge in the carpet which was glued over the ply panels perfect for t25 panels.
-
- Registered user
- Posts: 588
- Joined: 10 Aug 2015, 06:50
- 80-90 Mem No: 14800
- Location: Peel, Isle of Man
Re: Interior panel templates for the rear
Thanks for the response guys. For tree clip idea sounds good
1987 VW T25: Subaru EJ20 using RJES parts (If it was meant to go fast it wouldn't be brick shaped!)