Propex HS2000 - Placing a filter on end pipes?

The Tardis factor (interiors, awnings, roofs etc)

Moderators: User administrators, Moderators

Post Reply
nesty
Registered user
Posts: 739
Joined: 18 Aug 2007, 13:19
80-90 Mem No: 4023
Location: Bushey, Hertfordshire

Propex HS2000 - Placing a filter on end pipes?

Post by nesty »

I have a Propex HS2000. All works fine. Though I tend to get flashing code 5 a lot (IE something stuck up the intake/outlet). I place a vacuum on the end of the pips and starts again all ok.

Is there any capping or filter. I can place on the end of these pipes to prevent crud or spiders etc blocking up the tubes?
Holdsworth Villa2 1983 1.9 DG, 4 Speed, LPG & Petrol+underslung leisure tank

User avatar
Oldiebut goodie
Registered user
Posts: 7265
Joined: 18 Apr 2008, 01:19
80-90 Mem No: 11135
Location: Eastern Angle

Re: Propex HS2000 - Placing a filter on end pipes?

Post by Oldiebut goodie »

Sticking fan most probably. Lack of monthly running to keep it good can be a cause.
http://forum.club8090.co.uk/viewtopic.php?f=1&t=160157
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶

Post Reply