Eberspacher thermostat control
Moderators: User administrators, Moderators
Eberspacher thermostat control
Hello, I am in the process of rebuilding my 86 mosaic westfalia syncro, it's been a long slow project. During the eternity its taken I've managed to loose a photo of a wiring diagram for the bl2 heater control unit. I have searched but cannot find a diagram for the room thermostat/control unit. I have tried and failed to upload a photo of the controller, its brown, has a dail,a hot cold switch and 2 lights, one red one green. The part number is 20 1634 80 110/12v. Inside the controller is a 8 port terminal block, there is one red yellow jumper cable between 2 ports and I have 6 more cables to connect. Red, black, yellow, brown, blue and a stripped red yellow. Does anybody have one that they could have a look at, please. Will try again later with a photo. Thanks for any help
- Oldiebut goodie
- Registered user
- Posts: 7264
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Re: Eberspacher thermostat control
All in the manual! pm me with your email address and I will send you a copy. You may have to check which colours go where at the ecu etc. as a couple of yours don't match the Mosaic wiring diagram.
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
Re: Eberspacher thermostat control
Thank you, will do.